Compression Brake
Show/hide table
Illustration 1 | g00732397 |
(1) Tighten two bolts (1) to the following torque. ... 28 ± 7 N·m (21 ± 5 lb ft)
(2) Injector lash adjustment screw. Loosen locknut (3). Turn adjustment screw (2) clockwise to the point of contact with the bridge pin. Turn adjustment screw (2) counterclockwise for 360 degrees, plus an additional 60 degrees counterclockwise 1/8 turn. Hold adjustment screw (2) in place and tighten locknut (3) to the following torque. ... 55 N·m (41 lb ft)
Note: The individual components of the Compression Brake are not serviced separately.
Caterpillar Information System:
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Flywheel Housing
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
320C Forest Machine Machine Systems Boom Cylinder - Assemble
320C Excavator Equipment Lowering with Engine Stopped
322C Excavator Machine Systems Stick Bearings and Seals - Remove
307C Excavator Window Wiper and Washer Control
330C Excavator Joystick Controls
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble
320C U Excavator Leaving the Machine
330C Excavator Securing the Machine
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
C-9 Engines for Caterpillar Built Machines Water Pump - Pulley for Serpentine Belt
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Visual Inspection
307C Excavator Hydraulic System Gear Pump (Blade) - Test
M325B Material Handler Hydraulic System Pump Hydraulic System
320B, 320B L and 320B N Excavators Joystick Controls