Stick Bearings and Seals - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 3S-6224     | 电动液压泵 (115 V) (1)     | 1     |
1P-2377 | 防尘塞     | 2     | |
8F-0024 | 软管组件     | 2     | |
1P-2376 | 连接器组件     | 2     | |
8T-0820 | 液压压力表     | 1     | |
3B-7722 | 管衬套     | 2     | |
6V-0113 | 双作用油缸     | 1     | |
9U-5266 | 接收衬套     | 1     | |
9U-5337 | 轴承拆卸工具适配器     | 1     | |
4C-9634 | 拉拔器螺柱     | 1     | |
9U-6832 | 螺母     | 1     | |
B     | 3S-6224     | 电动液压泵 (115 V) (1)     | 1     |
1P-2377 | 防尘塞     | 2     | |
8F-0024 | 软管组件     | 2     | |
1P-2376 | 连接器组件     | 2     | |
8T-0820 | 液压压力表     | 1     | |
3B-7722 | 管衬套     | 2     | |
6V-0113 | 双作用油缸     | 1     | |
4C-9634 | 拉拔器螺柱     | 1     | |
9U-5338 | 轴承拆卸工具适配器     | 1     | |
5P-8625 | 隔套     | 1     |
Show/hide table
( 1 ) | 8S-8033 电动液压泵 (230 v) 可用。 |
( 1 ) | 8S-8033 电动液压泵 (230 v) 可用。 |
开始:
- 拆下斗杆。 请参阅拆解和组装, "斗杆 - 拆卸"。
- 将唇形密封 (1) 从柱脚销接头处的孔上拆下。
Show/hide table
图 1 | g00727748 |
典型实例 |
- 将工具 (A) 固定到柱脚销接头处的套筒轴承 (2) 。
Show/hide table
图 2 | g00727752 |
典型实例 |
- 将吊索和起重机固定到工具 (A) 。
- 使用工具 (A) 拆下套筒轴承 (2) 。
- 重复第 1 步到第 4 步,将唇型密封和套筒轴承从斗杆的另一侧拆下。
- 将唇形密封 (3) 从动臂销孔上拆下。
Show/hide table
图 3 | g00727751 |
典型实例 |
- 将工具 (B) 固定到动臂上销接头的套筒轴承 (4) 。
Show/hide table
图 4 | g00727756 |
典型实例 |
- 将吊索和起重机固定到工具 (B) 。
- 使用工具 (B) 拆下套筒轴承 (4) 。
- 重复第 6 步到第 10 步,将唇型密封和套筒轴承从斗杆的另一侧拆下。
Caterpillar Information System:
307C Excavator Window Wiper and Washer Control
330C Excavator Joystick Controls
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Disassemble
330C Excavator Joystick Controls
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
3126B Engines General Information
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
320C Excavator Equipment Lowering with Engine Stopped
320C Forest Machine Machine Systems Boom Cylinder - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
C-9 Engines for Caterpillar Built Machines Flywheel Housing
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Compression Brake
320C U Excavator Leaving the Machine
330C Excavator Securing the Machine
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley