Water Pump - Pulley for Serpentine Belt
Show/hide table
 | |
| Illustration 1 | g00730883 |
(1) Clearance between the impeller and the housing ... 0.75 ± 0.25 mm (.030 ± .010 inch)
(2) Seal
(3) Height of seal ... 10.70 ± 0.15 mm (0.42 ± 0.01 inch)
(4) Distance from the front of the water pump pulley to the face of the housing ... 136.9 ± 0.3 mm (5.40 ± 0.01 inch)
(5) The bearing must not extend beyond the edge of the housing.
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
330C Excavator Securing the Machine
320C U Excavator Leaving the Machine
C-9 Engines for Caterpillar Built Machines Compression Brake
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Flywheel Housing
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
320C Forest Machine Machine Systems Boom Cylinder - Assemble
320C Excavator Equipment Lowering with Engine Stopped
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Visual Inspection
307C Excavator Hydraulic System Gear Pump (Blade) - Test
M325B Material Handler Hydraulic System Pump Hydraulic System
320B, 320B L and 320B N Excavators Joystick Controls
5110B Excavator Undercarriage - Check
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket
BA22, BA25 and BA30 Angling Brooms Safety Messages
BA22, BA25 and BA30 Angling Brooms Operation
313B Excavator Machine Systems Hydraulic Oil Cooler - Remove
313B Excavator Machine Systems Hydraulic Oil Cooler - Install
JF Series Starting Motor General Information