Visual Inspection
Show/hide table
NOTICE |
---|
Accumulated grease and oil on a work tool is a fire hazard. Remove debris with steam cleaning or high pressure water at any time a significant quantity of oil is spilled on the work tool. |
Note: If major repairs to the Work Tool are required, consult your Caterpillar dealer.
- For the maximum service life of the Work Tool, make a thorough walk-around inspection before you mount the machine and before you start the machine.
- Inspect the Work Tool for the following conditions: loose bolts, worn teeth, broken parts and worn parts. Inspect the Work Tool for missing parts. Check the overall condition of the Work Tool.
- Inspect the jaws of the Work Tool. Remove all scrap from the jaws.
- Inspect the welds, the pins, and the bores for damage. If the components are damaged, consult your Caterpillar dealer.
- Perform all repairs before you put the Work Tool into service.
- Check safety signs and labels.
- Lubricate pins.
Caterpillar Information System:
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
C-9 Engines for Caterpillar Built Machines Water Pump - Pulley for Serpentine Belt
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
330C Excavator Securing the Machine
320C U Excavator Leaving the Machine
C-9 Engines for Caterpillar Built Machines Compression Brake
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Flywheel Housing
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
307C Excavator Hydraulic System Gear Pump (Blade) - Test
M325B Material Handler Hydraulic System Pump Hydraulic System
320B, 320B L and 320B N Excavators Joystick Controls
5110B Excavator Undercarriage - Check
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket
BA22, BA25 and BA30 Angling Brooms Safety Messages
BA22, BA25 and BA30 Angling Brooms Operation
313B Excavator Machine Systems Hydraulic Oil Cooler - Remove
313B Excavator Machine Systems Hydraulic Oil Cooler - Install
JF Series Starting Motor General Information
313B ExcavatorEngine Supplement Radiator and Hydraulic Oil Cooler - Remove
313B ExcavatorEngine Supplement Radiator and Hydraulic Oil Cooler - Install