Stick Bracket
Show/hide table
 | |
| Illustration 1 | g00731048 |
(1) Torque on the bolt ... 460 ± 60 N·m (339 ± 44 lb ft)
Caterpillar Information System:
5110B Excavator Undercarriage - Check
320B, 320B L and 320B N Excavators Joystick Controls
M325B Material Handler Hydraulic System Pump Hydraulic System
307C Excavator Hydraulic System Gear Pump (Blade) - Test
G112, G115, G125 and G140 Mechanical Grapple Visual Inspection
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
C-9 Engines for Caterpillar Built Machines Water Pump - Pulley for Serpentine Belt
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
330C Excavator Securing the Machine
BA22, BA25 and BA30 Angling Brooms Safety Messages
BA22, BA25 and BA30 Angling Brooms Operation
313B Excavator Machine Systems Hydraulic Oil Cooler - Remove
313B Excavator Machine Systems Hydraulic Oil Cooler - Install
JF Series Starting Motor General Information
313B ExcavatorEngine Supplement Radiator and Hydraulic Oil Cooler - Remove
313B ExcavatorEngine Supplement Radiator and Hydraulic Oil Cooler - Install
C15 and C18 Engines for Caterpillar Built Machines CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
M325B Material Handler Hydraulic System Pilot Hydraulic System
M325B Material Handler Hydraulic System Gear Pump (Pilot)
2000/11/20 A New Hydraulic Oil Filter Element is Available for Extreme Dust Conditions {5068}
BA22, BA25 and BA30 Angling Brooms Approved Machines