Leaving the Machine
Show/hide table
 | |
| Illustration 1 | g00037860 |
- Use the steps and the handholds when you dismount. When you dismount, face the machine and use both hands.
- Inspect the engine compartment for debris. Clean out any debris in order to avoid a fire hazard.
- Remove all flammable debris from the front bottom guard through the access doors in order to reduce a fire hazard. Discard the debris properly.
- Turn the key for the battery disconnect switch to the OFF position. When the machine is left for an extended period of one month or longer, you should remove the key. This will help to prevent a battery short circuit. Removing the key will also help to protect the battery from vandalism and from the current draw that is made by certain components.
- Lock all vandalism covers and all compartments. The following items are examples of vandalism covers and compartments:
- Cover for the storage box
- Engine hood
- Side covers
- Fuel tank cap
- Cover for the storage box
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Compression Brake
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Flywheel Housing
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
320C Forest Machine Machine Systems Boom Cylinder - Assemble
320C Excavator Equipment Lowering with Engine Stopped
322C Excavator Machine Systems Stick Bearings and Seals - Remove
307C Excavator Window Wiper and Washer Control
330C Excavator Joystick Controls
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
330C Excavator Securing the Machine
365B, 365B Series II and 365BL Excavators Window Wiper and Washer Control
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
C-9 Engines for Caterpillar Built Machines Water Pump - Pulley for Serpentine Belt
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Visual Inspection
307C Excavator Hydraulic System Gear Pump (Blade) - Test
M325B Material Handler Hydraulic System Pump Hydraulic System
320B, 320B L and 320B N Excavators Joystick Controls
5110B Excavator Undercarriage - Check