Storage Box
Show/hide table
 | |
| Illustration 1 | g00679955 |
(1) Cap (2) Hole | |
The storage box is located behind the operator's seat.
This storage box is used to store miscellaneous items such as a first aid kit or a lunch box.
Note: There is a cap and a hole inside the storage box. Install cap (1) into hole (2) if you want to block the flow of air from the air conditioner or from the heater.
Storage Compartment
Show/hide table
 | |
| Illustration 2 | g00679956 |
This compartment is located on the right console.
Note: The ashtray can be moved from the left console and placed in this storage compartment. After the ashtray is moved, the storage compartment would be located on the left console.
Show/hide table
 | |
| Illustration 3 | g00679957 |
This compartment is located underneath the left armrest.
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
325D and 329D Excavators Radio - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
307C Excavator Hydraulic System Main Pump (Flow) - Test
JF Series Starting Motor Starting Motor Solenoid - Test
2000/10/30 Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
M318 Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Travel Motor
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
307C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
2000/08/07 The Assembly Procedure for the Main Hydraulic Pump Is Changed {5070}
2000/08/28 New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
320C Excavator Seat Heater - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
330C Excavator Window (Front)
MP-15, MP-20, MP-30 and MP-40 Multi Processors Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
325C and 325C L Excavator Alternate Exit
320C Excavator Cab Door
H140C S and H160C S Hydraulic Hammers Mounting Bracket Bolts - Tighten
320C Excavator Window Wiper and Washer Control
3126B Engines Electrical System
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Valve Pressure (Hydraulic Rotator) - Test
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install