New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
- Caterpillar Products: with 2W-9978 Hydraulic Oil Cooler Core
- ALL
A new 190-3835 Hydraulic Oil Cooler Core is now available to address problems in specific applications. These coolers contain copper-nickel alloy tubes that have increased resistance to corrosion. Specific applications may see a life that is less than the acceptable life due to water or contamination in the hydraulic oil. The new 190-3835 hydraulic oil cooler core is a direct replacement for the existing 2W-9978 Hydraulic Oil Cooler Core.
Caterpillar Information System:
330C Excavator Light Switches
307C Excavator Travel Alarm - If Equipped
320C Excavator Clock Adjustment
307C Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
SG16 Stump Grinder Work Tool Systems Stump Grinder Wheel
Machine Security System Electronic Control Module (ECM) - Replace
Machine Security System System Schematic
Machine Security System General Information
Machine Security System General Information
307C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
307C Excavator Light Switches
320C Excavator Power Receptacle - If Equipped
2000/08/07 The Assembly Procedure for the Main Hydraulic Pump Is Changed {5070}
307C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
M318 Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Travel Motor
2000/10/30 Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
JF Series Starting Motor Starting Motor Solenoid - Test
307C Excavator Hydraulic System Main Pump (Flow) - Test
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
325D and 329D Excavators Radio - If Equipped
3176C and 3196 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
320C Excavator Storage Box