Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
- Caterpillar Products: with Cabs
- All
Description of Change: Part numbers for the electric motors that are used in all Caterpillar cab equipped machines have changed. Refer to Table 1 for a complete list of parts that are changing.
Also, Table 1 lists the parts that are now available for both the 3E-7757 Motor As and for the 9X-4218 Motor As.
Show/hide table
Parts Chart for Cross Referencing the Cab Fan Motors     | ||||
Motor Assembly     | Harness Assembly     | Bracket     | Seal (Rubber Spacer)     | |
Former Part Number     | New Part Number     | New Part Number     | New Part Number     | New Part Number     |
164-9206     | 174-1486     | N/A     | N/A     | 5P-5908     |
112-9565     | 174-1489     | N/A     | N/A     | 5P-5908     |
3E-7501     | 174-1490     | 174-1509     | N/A     | 5P-5908     |
3E-6386     | 174-1504     | N/A     | 175-0070 (1)     | N/A     |
9G-8693     | 174-1504     | 174-1491     | 175-0070 (1)     | N/A     |
121-2896     | 174-1504     | 174-1510     | N/A     | N/A     |
3E-6387     | 174-1505     | N/A     | 175-0070 (1)     | N/A     |
9G-8697     | 174-1505     | 174-1517     | 175-0070 (1)     | N/A     |
121-2897     | 174-1505     | 174-1513     | N/A     | N/A     |
3E-6392     | 174-1494     | N/A     | (2)     | 5P-5908     |
9X-9363     | 174-1494     | 142-2387     | N/A     | 5P-5908     |
106-2721     | 174-1495     | N/A     | 175-0070 (1)     | N/A     |
7X-6279     | 174-1495     | 174-1518     | 175-0070 (1)     | N/A     |
6T-6111     | 174-1495     | 174-1498     | N/A     | N/A     |
7X-1017     | 174-1495     | 174-1499     | N/A     | N/A     |
103-5696     | 174-1496     | N/A     | 175-0070 (1)     | N/A     |
7X-1991     | 174-1506     | 174-1516     | N/A     | N/A     |
9G-8695     | ||||
7X-1992     | 174-1507     | 174-1491     | N/A     | N/A     |
9G-8694     | ||||
9X-0343     | -     | 142-2387     | N/A     | N/A     |
9W-0605     | 174-1503     | N/A     | N/A     | N/A     |
9W-0604     | 174-1500     | N/A     | N/A     | N/A     |
107-8672     | 174-1502     | N/A     | N/A     | N/A     |
3E-7757     | 174-1508     | N/A     | 191-7726 Bracket (3)     | 5P-5908     |
9X-4218     | 174-1508     | 174-3070     | 191-7726 Bracket (3)     | 5P-5908     |
Show/hide table
( 1 ) | This bracket replaces the 2G-0415 Bracket and the 9G-1182 Bracket . |
( 2 ) | It will be necessary to modify the existing bracket. |
( 3 ) | This bracket requires the following parts: (2) 8C-4586 Motor Clamps , (2) 8T-4205 Hard Washers , 6V-7728 Bolt and 129-3178 Locknut |
Adaptable To: The new part numbers are a direct replacement for the former part numbers. The new part numbers are effective with all Caterpillar cab equipped machines.
Caterpillar Information System:
M318 Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Travel Motor
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
307C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
2000/08/07 The Assembly Procedure for the Main Hydraulic Pump Is Changed {5070}
2000/08/28 New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
330C Excavator Light Switches
307C Excavator Travel Alarm - If Equipped
320C Excavator Clock Adjustment
307C Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
SG16 Stump Grinder Work Tool Systems Stump Grinder Wheel
Machine Security System Electronic Control Module (ECM) - Replace
JF Series Starting Motor Starting Motor Solenoid - Test
307C Excavator Hydraulic System Main Pump (Flow) - Test
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
325D and 329D Excavators Radio - If Equipped
3176C and 3196 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
320C Excavator Storage Box
320C Excavator Seat Heater - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
330C Excavator Window (Front)
MP-15, MP-20, MP-30 and MP-40 Multi Processors Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
325C and 325C L Excavator Alternate Exit