G3500 Engines Caterpillar

Assembly Procedure

Show/hide table

Illustration 1	g00597280
Typical example

1. Place base (13) on throttle assembly (14) and install the bolts.

2. Install the screws and mixer housing (12) on base (13).
   Show/hide table

   Illustration 2	g00597284
   Typical example

3. Install shaft (11). Install stop assembly (9) and tighten the set screw.

4. Install lever (8) and tighten the bolt.

5. Install disc (10) and the setscrews on shaft (11).
   Show/hide table

   Illustration 3	g00597239
   Typical example

6. Install diaphragm (7) and screws (6).
   Show/hide table

   Illustration 4	g00597238
   Typical example

   Show/hide table

   Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment.

7. Install air valve assembly (3), spring (4), cover (5), and the screws.
   Show/hide table

   Illustration 5	g00597237
   Typical example

8. Install the gasket and adapter (1) on base (2).

End By:

1. Install the carburetor. Refer to Disassembly and Assembly, "Carburetor - Install".