Inlet and Exhaust Valve Seat Inserts - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 6V-4805     | 气门座抽取器工具总成     | 1     |
开始:
- 拆下进气门和排气门。 请参考解体与组装, "进气门和排气门 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 从缸盖上拆下气门座圈。
Show/hide table
图 1 | g00490857 |
- 清洁缸盖中的气门座。 清除缸盖中的气门座上的任何粗糙区域。
- 对其余进气门座圈和排气门座圈,重复第 1 和 2 步。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 6V-4805     | 气门座抽取器工具总成     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 降低温度,使新的气门座圈冷缩。 使用工具 (A) 将新的气门座圈安装到缸盖中。
注: 当座圈已安装到缸盖中后,不要增大气门座圈中抽取器的直径。
Show/hide table
图 2 | g00508515 |
- 对其余进气门座圈和排气门座圈,重复第 1 步。
End By: 安装进气门和排气门。 请参考 解体与组装, "进气门和排气门 - 拆卸和安装"。
Caterpillar Information System:
3306B Industrial Engine Fuel Ratio Control
3304B and 3306B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3612 and G3616 Engines Engine Timing Procedures
C-10 and C-12 Truck Engines Rear Power Take-Off (RPTO)
G3612 and G3616 Engines Governor Adjustment Procedure
3406C (PEEC III) Truck Engine Engine Support (Front)
3304B and 3306B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3600 and C280 Diesel Engine Fluids Recommendations Heavy Fuel Oil
3406C Engines for Caterpillar Built Machines Exhaust Manifold Shield
G3612 and G3616 Engines Choke Trim
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Block
C-10 and C-12 Truck Engines Boost Pressure Sensor
3306B Industrial Engine Troubleshooting
3306B Industrial Engine Electric Starting Motor - Remove and Install
3306B Industrial Engine Alternator - Remove and Install
3306B Industrial Engine Fuel Injection Lines
G3612 and G3616 Engines Engine Supervisory System
Electronic Modular Control Panel II (EMCP II) for EUI Engines Service Record
G3612 and G3616 Engines Ignition System
3406C (PEEC III) Truck Engine Manual Shutoff
3306B Industrial Engine Gear Group (Front)
3306B Industrial Engine Fuel System
3406C (PEEC III) Truck Engine Governor and Fuel Pump Drive
3406C (PEEC III) Truck Engine Timing Position Sensor and Timing Solenoid (BTM)