Electronic Control Module (ECM)
电子控制模块(ECM)是控制发动机的计算机。 闪存文件是控制 ECM 行为的软件。
Show/hide table
图 1 | g00319343 |
ECM(典型示例) (1) 燃油出口 (2) ECM (3) 燃油进口 |
ECM (2) 通过燃油在控制模块内的歧管内循环来冷却。 来自输油泵的燃油经由进油口 (3) 进入控制模块。 燃油自出油口 (1) 流出控制模块。
- 闪存文件含有所有用于 ECM 的软件和指令。
- 控制图确定燃油消耗率、正时和其它类似的数值。 在各种不同工况下定义这些数值,以便获得最佳的发动机性能和燃油消耗量。 这些数值被编程输入在闪存文件中。
ECM 由以下各项组成:
- ECM 具有一个用来执行计算功能的微处理器。 需要微处理器以支持 ECM 执行这些功能:管理, 喷射正时控制, 系统诊断 和 数据链路通信。 微处理器接收来自闪存文件中软件的指令。
- ECM 具有一个永久存储器,该存储器用来存储可编程的参数和诊断代码。
- 输入电路将传感器信号中的电气噪声过滤掉。 输入电路保护 ECM 的内部电路,以防具有潜在破坏性的电压水平。
- 输出电路提供必要的高电流来向喷油器电磁阀、灯和继电器通电。
- 电源电路为喷油器电磁阀提供高电压。 电源电路为内部电路和外部传感器提供清洁稳定的电力。
Caterpillar Information System:
3408B and 3412C Generator Set Engines Basic Block
G3500 Engines Before Starting Engine
G3300 Engines Cold Weather Starting
3408B and 3412C Generator Set Engines Engine Design
3618 Engine Aftercooler
3306B Industrial Engine Engine Air Cleaner Element (Dual Element) - Clean/Replace
3618 Engine Turbocharger
G3500 Engines Speed Sensor - Clean/Inspect
3408B and 3412C Generator Set Engines Basic Block
3208 Marine Engine Engine Operation
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Speed/Timing Sensor - Clean/Inspect
G3612 and G3616 Engines Flexible Coupling
345B Excavator Swing Gear - Lubricate
G3500 Engines Starting the Engine
3500B and 3500B High Displacement Generator Set Engines Electronic Control System Components
G3500 Engines After Starting Engine
3508, 3512, and 3516 Generator Sets Engine Valve Lash - Inspect/Adjust
G3300 Engines Engine Operation
G3500 Engines Emergency Stopping
C15 and C18 Petroleum Generator Sets Engine Air Precleaner - Check/Clean
3500B and 3500B High Displacement Generator Set Engines Cold Cylinder Cutout
G3500 Engines Manual Stop Procedure
G3300 Engines Exhaust Piping - Inspect
G3300 Engines Fuel System Fuel Filter Differential Pressure - Check