Flexible Coupling
Show/hide table
 | |
| Illustration 1 | g00318007 |
(1) Bolts
- Torque ... 1050 ± 150 N·m (780 ± 110 lb ft)
(2) Bolts
- Torque ... 505 ± 25 N·m (370 ± 18 lb ft)
(3) Bolts
-
Apply 9S-3263 Thread Lock Compound to the threads of the bolts.
- Torque ... 370 ± 20 N·m (270 ± 15 lb ft)
(4) Bolts
- Torque ... 50 ± 10 N·m (37 ± 7 lb ft)
(5) Bolts
-
Apply 9S-3263 Thread Lock Compound to the threads of the bolts.
- Torque ... 285 ± 15 N·m (210 ± 11 lb ft)
(6) Bolts
- Torque ... 285 ± 15 N·m (210 ± 11 lb ft)
Caterpillar Information System:
3054B Industrial Engine Electrical System
G3300 Engines Engine Air Cleaner Element - Replace
Procedures For The Installation And Initial Start-Up Of Gas Engine Chiller Drivelines{1014} Procedures For The Installation And Initial Start-Up Of Gas Engine Chiller Drivelines{1014}
Electronic Modular Control Panel II (EMCP II) AL Fault Codes
G3500 Engines Cylinders - Inspect
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Rating Definitions
3618 Engine Prelube Pump Motors
G3500 Engines Engine Oil Filter (Auxiliary) - Change
3508, 3512 and 3516 Engines Ether Control System
3618 Engine Electronic Sensors
Electronic Modular Control Panel II (EMCP II) For MUI Engines AC Offset Adjustment OP10
SPS342 Skid Mounted Pumper Electrical System
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Speed/Timing Sensor - Clean/Inspect
3208 Marine Engine Engine Operation
3408B and 3412C Generator Set Engines Basic Block
G3500 Engines Speed Sensor - Clean/Inspect
3618 Engine Turbocharger
3306B Industrial Engine Engine Air Cleaner Element (Dual Element) - Clean/Replace
3618 Engine Aftercooler
3408B and 3412C Generator Set Engines Engine Design
G3300 Engines Cold Weather Starting
G3500 Engines Before Starting Engine
3408B and 3412C Generator Set Engines Basic Block
3500B and 3500B High Displacement Generator Set Engines Electronic Control Module (ECM)