The New Aftercooler Core Assembly (ATAAC) Is Now Used on Certain 24M Motor Graders {1063, 1064, 1079}
- Motor Grader:
- 24M (S/N: B9K1-UP)
ReferenceRefer to Disassembly and Assembly, KENR6020, "Aftercooler - Remove and Install."
Description of Change: The new aftercooler core assembly is an aluminum bar plate core designed for extended service life with reinforced tanks. The new aftercooler core assembly will improve service life and minimize the thermal stress.
Adaptable To:
Show/hide table
Illustration 1 | g03351638 |
Show/hide table
Illustration 2 | g03351639 |
The new 396-9735 Aftercooler Core As with extended service life replaces the former 274-7831 Aftercooler Core As in the 177-9085 Air Aftercooler Gp.
Show/hide table
Parts List     | ||||
Item     | Qty     | New Part Number     | Description     | Former Part Number     |
1     | 1     | 396-9735     | Aftercooler Core As     | 274-7831     |
2     | 2     | 270-8390 (1)     | Seal     | -     |
3     | 4     | 115-6433     | Washer     | -     |
4     | 4     | 8D-0983     | Vibration Isolator Mount     | -     |
5     | 1     | 6V-2499 (1)     | Seal     | -     |
6     | 3     | 272-5438 (1)     | Radiator Seal     | -     |
Show/hide table
( 1 ) | use as required |
Procedure to update seals in the radiator group:
If the machine has a 276-2386 Radiator Gp, a portion of the 300-1707 Coolant Tank As (7) will need to be removed. Refer to the steps below.
- Remove dimension (A) from the edge of the flat part of the expansion tank next to the ATAAC. Refer to Illustration 3.
Show/hide table
Illustration 3 | g03351657 |
(A) Dimension is 30 mm (1.2 inch) |
- Install two seals (2), one seal (5), and three radiator seals (6) .
Caterpillar Information System:
Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334} Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334}
12M Motor Grader TA2 Technical Inspection{7000} 12M Motor Grader TA2 Technical Inspection{7000}
C175-16 Engine for Off-Highway Trucks Exhaust Manifold
521B and 522B Track Feller Bunchers Machine Systems Stick - Remove and Install
C13, C15, and C18 Tier 4 Final Engines DEF Pump Motor - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump - Replace
521B and 522B Track Feller Bunchers Machine Systems Stick Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines DEF Pump Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump Pressure Sensor - Test
C13, C15, and C18 Tier 4 Final Engines NOx Sensor - Test
R3000H Load Haul Dump Braking System Brake Control Valve (Parking)
Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284} Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284}
521B and 522B Track Feller Bunchers Machine Systems Boom Cylinder - Remove and Install
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Additive Spray System - If Equipped
MH3049 Material Handler Hydraulic System Hydraulic Filter (Pilot)
C175-16 Engine for Off-Highway Trucks Exhaust Fitting
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Additive Spray System - Drain
CW14 Pneumatic CompactorMachine Systems Axle (Front) - Remove and Install
770G and 772G Off-Highway Truck/Tractors Wiring Harness (Short Circuit) - Test
770G and 772G Off-Highway Truck/Tractors Wiring Harness (Open Circuit) - Test
2012/09/10 New Communication Software Group For VIMS 3G Software Is Now Used On Certain Off-Highway Trucks {7620}
CW14 Pneumatic CompactorMachine Systems Hydraulic Cylinder (Steering) - Remove and Install
770G and 772G Off-Highway Truck/Tractors General Information
521B and 522B Track Feller Bunchers Machine Systems Boom - Remove and Install