Brake Control Valve (Parking)
Show/hide table
 | |
| Illustration 1 | g03202299 |
Show/hide table
| Specification for 380-0154 Control Valve Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 111-0343 Locknut | Torque to 9 ± 0.5 N·m (80 ± 4 lb in). |
| 2 | 3 | 186-9083 Coil | Voltage is 24 VDC. |
| Resistance is 20 ± 3 Ohms at 25 °C (77 °F). |
|||
| Current is 1.75 Amps. | |||
| 3 | 1 | 218-9894 Coil | Voltage is 24 VDC. |
| Continuous duty. | |||
| Resistance is 20 ± 3 Ohms at 25 °C (77 °F). |
|||
| 4 | 1 | 170-7485 Valve Spool As | Torque to 115 ± 7 N·m (85 ± 5 lb ft). |
| 5 | 1 | 186-9084 Solenoid Valve Gp | Torque to 51 ± 4 N·m (38 ± 3 lb ft). |
| 6 | 1 | 186-8177 Pressure Switch | Torque to 40 ± 5 N·m (30 ± 4 lb ft). |
| Actuation pressure at −40°C to +120°C (−40°F to +250°F) is 2760 kPa (400 psi). |
|||
| Deactuation pressure at −40°C to +120°C (−40°F to +250°F) is 2480 ± 100 kPa (360 ± 15 psi). |
|||
| 7 | 1 | 344-7389 Pressure Sensor Gp (PARKING BRAKE OIL) | Torque to 62 ± 6 N·m (46 ± 4 lb ft). |
| Operating voltage is between +7 VDC to + 14 VDC. | |||
| Output: PWM | |||
| Output frequency is 500 ± 100 Hz. | |||
| Duty cycle is between 5 and 95%. | |||
Caterpillar Information System:
Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284} Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284}
R3000H Load Haul Dump Power Train Torque Converter
R3000H Load Haul Dump Machine Electrical System Speedometer/Tachometer
R3000H Load Haul Dump Machine Electrical System Parking Brake
R3000H Load Haul Dump Machine Electrical System Backup Alarm
R3000H Load Haul Dump Machine Electrical System Horn
R3000H Load Haul Dump Machine Electrical System Fuel Level
R3000H Load Haul Dump Machine Electrical System Idle Timer/Fire Suppression Control
MH3049 Material Handler Hydraulic System Swing Drive
CW14 Pneumatic CompactorMachine Systems Fuel Tank - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems Tilt Cylinder (Saw) - Remove and Install
2012/09/06 New Mount Assembly Is Now Used in the Fender Group on 789D Off-Highway Trucks {7252, 7252}
C13, C15, and C18 Tier 4 Final Engines NOx Sensor - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump Pressure Sensor - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump Sensor Supply - Test
521B and 522B Track Feller Bunchers Machine Systems Stick Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines DEF Pump - Replace
C13, C15, and C18 Tier 4 Final Engines DEF Pump Motor - Test
521B and 522B Track Feller Bunchers Machine Systems Stick - Remove and Install
C175-16 Engine for Off-Highway Trucks Exhaust Manifold
12M Motor Grader TA2 Technical Inspection{7000} 12M Motor Grader TA2 Technical Inspection{7000}
Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334} Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334}
2012/10/23 The New Aftercooler Core Assembly (ATAAC) Is Now Used on Certain 24M Motor Graders {1063, 1064, 1079}
521B and 522B Track Feller Bunchers Machine Systems Boom Cylinder - Remove and Install