Exhaust Manifold
Show/hide table
Illustration 1 | g03202563 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 8 | 490-6439 Band Clamp(1) | Lubricate the threads, bearing surfaces and inside diameter of the clamps before assembly with Loctite® C5A Copper Anti-Seize. |
Torque to |
|||
2 | 4 | 443-5940 Bellows As(1) | Ensure that the bellows are Installed in the proper direction as marked on the bellows by an arrow. |
Ensure that the distance between the convolutions is uniform. | |||
3 | 4 | 099-0169 Bolt | Before Assembly, lubricate the threads and bearing surfaces with Loctite® C5A Copper Anti-Seize. |
4 | 2 | 322-5830 Bolt | |
5 | 8 | 349-3559 High Temperature Bolt | Before assembly, lubricate the threads and bearing surfaces with Loctite® C5A Copper Anti-Seize. |
Torque to |
|||
6 | 2 | 246-4924 Gasket | After assembly, bend the tab of the gasket to the adjacent surface. |
Show/hide table
(1) | Do not reuse |
Caterpillar Information System:
521B and 522B Track Feller Bunchers Machine Systems Stick - Remove and Install
C13, C15, and C18 Tier 4 Final Engines DEF Pump Motor - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump - Replace
521B and 522B Track Feller Bunchers Machine Systems Stick Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines DEF Pump Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines DEF Pump Pressure Sensor - Test
C13, C15, and C18 Tier 4 Final Engines NOx Sensor - Test
R3000H Load Haul Dump Braking System Brake Control Valve (Parking)
Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284} Procedure to Install Tow Hook Release on R1300G Load Haul Dump Machines {4251, 4257, 4284}
R3000H Load Haul Dump Power Train Torque Converter
R3000H Load Haul Dump Machine Electrical System Speedometer/Tachometer
R3000H Load Haul Dump Machine Electrical System Parking Brake
12M Motor Grader TA2 Technical Inspection{7000} 12M Motor Grader TA2 Technical Inspection{7000}
Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334} Procedure to Update Front Light Wiring Harness Assembly On Certain Motor Graders{4334}
2012/10/23 The New Aftercooler Core Assembly (ATAAC) Is Now Used on Certain 24M Motor Graders {1063, 1064, 1079}
521B and 522B Track Feller Bunchers Machine Systems Boom Cylinder - Remove and Install
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Additive Spray System - If Equipped
MH3049 Material Handler Hydraulic System Hydraulic Filter (Pilot)
C175-16 Engine for Off-Highway Trucks Exhaust Fitting
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Additive Spray System - Drain
CW14 Pneumatic CompactorMachine Systems Axle (Front) - Remove and Install
770G and 772G Off-Highway Truck/Tractors Wiring Harness (Short Circuit) - Test
770G and 772G Off-Highway Truck/Tractors Wiring Harness (Open Circuit) - Test
2012/09/10 New Communication Software Group For VIMS 3G Software Is Now Used On Certain Off-Highway Trucks {7620}