Removal Procedure
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 360-6959     | Cylinder     | 1     |
350-7768 | Electric Hydraulic Pump Gp     | 1     | |
350-7769 | Electric Hydraulic Pump Gp     | 1     | |
B     | 6V-3175     | Double Acting Cylinder     | 1     |
5P-5214 | Sleeve     | 1     | |
1P-1837 | Bearing Puller Adapter     | 1     | |
4C-9634 | Puller Stud     | 1     | |
9U-6832 | Nut     | 1     | |
4K-0684 | Hard Washer     | 1     | |
350-7768 | Electric Hydraulic Pump Gp     | 1     | |
350-7769 | Electric Hydraulic Pump Gp     | 1     | |
C     | 1U-9200     | Lever Puller Hoist Gp     | 1     |
Start By:
- Remove travel motor.
High hydraulic pressure hazard. This machine will not automatically release hydraulic oil pressure from the hydraulic system after the engine has been stopped. Hydraulic system pressure will not be released by use of operator controls. Hydraulic oil pressure can remain in the system for a time after the engine has stopped. Personal injury or death may result from the release of hydraulic oil pressure, the release of hot oil, or parts separating with force if proper care is not used during the disassembly. Use extreme caution at all times when servicing this machine or any of the components. Park the machine on a level surface and lower all implements to the ground. Sudden movement of the machine or the release of oil under pressure can cause injury or death to persons on or near the machine. Allow all fluids to cool prior to performing any service work. Take appropriate precautions to ensure safety from any remaining pressure. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose assembly (1) .
Illustration 1 | g03171477 |
- Remove bolts (2) and plate (3) .
Illustration 2 | g03171478 |
- Remove bolts (4) and plate (5) .
Illustration 3 | g03171496 |
- Attach Tooling (C) and a suitable lifting device to wheel spindle assembly (6). The weight of wheel spindle assembly (6) is approximately 485 kg (1070 lb).
Illustration 4 | g03171498 |
- Use Tooling (A) in order to remove pins (7) and (8) .
Illustration 5 | g03171499 |
Illustration 6 | g03171519 |
- Use Tooling (B) in order to remove bushing (9) .
Illustration 7 | g03171520 |
- Remove bolts (10) .
Illustration 8 | g03171521 |
- Use a suitable lifting device in order to remove spindle (11) .
Illustration 9 | g03171523 |
Installation Procedure
- Install wheel spindle (11) in the reverse order of removal.