Engine Enclosure (Hood)
Show/hide table
 | |
| Illustration 1 | g03171920 |
Show/hide table
| Specification for 374-9810 Engine Enclosure Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 9X-2039 Screw | Before assembly, apply blue Loctite 242 to the threads. Torque to 30 ± 7 N·m (266 ± 62 lb in). |
| 2 | - | - | Before assembly, apply clear Loctite 498 on both sides. |
| 3 | 1 | 374-9837 Insulation | Center insulation side by side on firewall to 0.0 to 6.0 mm (0.00 to 0.24 inch). Install the insulation flush 0.0 to 10.0 mm (0.00 to 0.40 inch) from the bottom surface of the firewall. |
| 4 | 6 | 8T-4195 Bolt | Torque to 30 ± 7 N·m (266 ± 62 lb in). |
| 5 | 2 | 124-6569 Fastener | Press fastener through foam and into frame rail. Fastener should dimple foam by 8.0 ± 2.0 mm (0.31 ± 0.08 inch). |
Show/hide table
 | |
| Illustration 2 | g03172218 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 2 | - | Adjust bumpers so that the mating part contacts the frame when the hood is closed. There should be no movement between the hood latch and striker. |
| 7 | 1 | 8T-4244 Nut | Before assembly, apply blue Loctite 242 to the threads. |
Show/hide table
 | |
| Illustration 3 | g03172336 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 8 | 1 | 358-3245 Gasket | When assembling hood skin to frame assembly, bolt holes needs to align enough to pass M10 bolts through. |
| 9 | 37 | 8T-4138 Bolt | Torque to 6 ± 1 N·m (53 ± 9 lb in) |
Caterpillar Information System:
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Fuel Lines
Cat® Fleet Onboard Configuration for Version 3.1 Software Configuration Keys (Fleet Onboard)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Battery and Wiring Group
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Propel, Vibratory) - Remove and Install
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory) - Remove and Install
MH3049 Material Handler Power Train Wheel Hub - Remove and Install
559C and 579C Knuckleboom Loaders Hydraulic Tank
CW14 Pneumatic Compactor Machine Systems Spray Nozzle - Adjust
CW14 Pneumatic Compactor Machine Systems Water Spray Pump Flow - Test
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129} Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Cat® Fleet Onboard Configuration for Version 3.1 Software Configuration Keys (Object Detection)
CB22B, CB24B, CB32B and CC24B Utility Compactors Engine Air Filter Service Indicator - Inspect
12M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
12M Motor Grader Power Train Transmission Oil Filter Base - Remove and Install
12M Motor Grader Power Train Transmission Oil Filter Base - Disassemble
12M Motor Grader Power Train Transmission Oil Filter Base - Assemble
Installation Procedure For An Updated Air Conditioner Manifold On Certain 24M Motor Graders{1808} Installation Procedure For An Updated Air Conditioner Manifold On Certain 24M Motor Graders{1808}
Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat® ET){0785, 4300, 7610} Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat® ET){0785, 4300, 7610}
CD44B and CD54B Vibratory Asphalt Compactors Monitoring System
559C and 579C Knuckleboom Loaders Relief Valve (Swing Drive)
559C and 579C Knuckleboom Loaders Breaker Relief Valve (Hydraulic Tank)
MH3049 Material Handler Hydraulic System Hydraulic System Pressure - Test and Adjust - Anti-Cavitation
2012/08/27 Improved Pressure Sensor Is Now Used on Suspension Systems on Certain Off-Highway Trucks {7200, 7213, 7494}
2012/12/17 A New Piston Motor Group and Fan Adapter Update the Suction Fan Group on the 793C Off-Highway Trucks {1356, 5058}