Transmission Oil Filter Base - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove plug (7) and drain filter (6) into a suitable container for storage or disposal.
- Remove filter housing (6).
- Disconnect fitting (1). Disconnect harness assembly (3). Disconnect hose assembly (4). Remove bolts (5) and remove filter base (2).
Show/hide table
Illustration 2 g01430328 - Remove filter element (8) from filter housing (6).
Show/hide table
Illustration 3 g01430333 - Remove O-ring seal (9).
Show/hide table
Illustration 4 g01430337 - Remove bolts (10). Remove mounting bracket (11).
Show/hide table
| |
| Illustration 1 | g01430324 |
- Install the transmission oil filter base in the reverse order of removal.
- Refer to Operation and Maintenance Manual, "Transmission and Differential Oil Level - Check" for the correct oil level.
Caterpillar Information System:
12M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Engine Enclosure (Hood)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Fuel Lines
Cat® Fleet Onboard Configuration for Version 3.1 Software Configuration Keys (Fleet Onboard)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Battery and Wiring Group
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Propel, Vibratory) - Remove and Install
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory) - Remove and Install
MH3049 Material Handler Power Train Wheel Hub - Remove and Install
559C and 579C Knuckleboom Loaders Hydraulic Tank
CW14 Pneumatic Compactor Machine Systems Spray Nozzle - Adjust
CW14 Pneumatic Compactor Machine Systems Water Spray Pump Flow - Test
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129} Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
12M Motor Grader Power Train Transmission Oil Filter Base - Disassemble
12M Motor Grader Power Train Transmission Oil Filter Base - Assemble
Installation Procedure For An Updated Air Conditioner Manifold On Certain 24M Motor Graders{1808} Installation Procedure For An Updated Air Conditioner Manifold On Certain 24M Motor Graders{1808}
Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat® ET){0785, 4300, 7610} Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat® ET){0785, 4300, 7610}
CD44B and CD54B Vibratory Asphalt Compactors Monitoring System
559C and 579C Knuckleboom Loaders Relief Valve (Swing Drive)
559C and 579C Knuckleboom Loaders Breaker Relief Valve (Hydraulic Tank)
MH3049 Material Handler Hydraulic System Hydraulic System Pressure - Test and Adjust - Anti-Cavitation
2012/08/27 Improved Pressure Sensor Is Now Used on Suspension Systems on Certain Off-Highway Trucks {7200, 7213, 7494}
2012/12/17 A New Piston Motor Group and Fan Adapter Update the Suction Fan Group on the 793C Off-Highway Trucks {1356, 5058}
CB22B, CB24B, CB32B and CC24B Utility Compactors Engine Oil Level - Check
12M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Disassemble