2012/07/25 Caterpillar


A New Alternator Harness Is Now Used on the AP500E Asphalt Paver {1406, 1408}

Usage:

AP-500E JWK
Asphalt Paver:
AP500E (S/N: JWK1-UP)

Description of Change: A new alternator harness is now used on the AP500E Asphalt Paver. A resistor has been added to the harness to excite the alternator. This change will enhance the reliability of the charging system.

Adaptable To: The 327-5327 Machine Wiring Gp will be replaced by 399-3794 Engine Harness As.

The effectivity for this change is listed in the table that follows.

Table 1
Effectivity    
Model     Adaptable to Machine     Effective With Machine    
AP500E     S/N:JWK1-189     S/N:JWK190-UP    
The required parts for this change can be found in the Table that follows.

Table 2
Required Parts    
Item    
Part Number    
Part Name     QTY    
1     099-3649     Bolt     1    
2     132-5789     Clip     1    
3     177-2215     Strap     6    
4     399-3794     Engine Harness As     1    
5     3E-4352     Hard Washer     1    
6     5C-2874     Nut     1    
7     7E-0976     Boot     1    
8     7K-1181     Cable Strap     6    

Caterpillar Information System:

2012/08/07 New Bearing Group and Clevis Pin Is Now Used on AS4252C Screeds {5639, 5641}
2012/07/31 New Support Group Blade Now Used on AS4252C Screeds {6656}
730C2 and 725C2 Articulated Truck Power Train Relief Valve - Remove and Install
CB14B Vibratory Asphalt Compactor Propel System Drive and Vibratory Drum
CB14B Vibratory Asphalt Compactor Propel System Drive and Vibratory Drum
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Air Lines
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Air Cleaner
CB14B Vibratory Asphalt Compactor Machine Systems Instrument Console
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism
CB14B Vibratory Asphalt Compactor Machine Systems Muffler
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Instrument Panel
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Bypass Valve
559C and 579C Knuckleboom Loaders General Information
990K Wheel Loader Alternate Exit
349F and 352F Excavators Determining Diagnostic Trouble Codes
559C and 579C Knuckleboom Loaders Connector Locations
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Disassemble
349F and 352F Excavator Machine System Electrical Connector - Inspect
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Assemble
559C, 579C, 2384C, and 2484C Knuckleboom Loaders TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 559C, 579C, 2384C, and 2484C Knuckleboom Loaders TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
MH3049 Material Handler Hydraulic System Main Control Valve Air - Purge
12M Motor Grader Machine Systems Centershift Lock Bar and Bushings - Remove
12M Motor Grader Machine Systems Centershift Lock Bar and Bushings - Install
12M Motor Grader Machine Systems Centershift Lock - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.