Usage:
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI3648" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T " as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3648" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and " Z" as the SIMS Description Code.
Completion Date
January 31, 1994Termination Date
July 31, 1994Problem
The plungers in the dual tilt cylinders on certain D10N tractors may fail. A new piston assembly with a larger diameter plunger should be installed.
Affected Product
Model & Identification Number
D10N (2YD2218-2219, 2YD2222-2225, 2YD2230-2231, 2YD2235-2239, 2YD2242, 2YD2246-2248, 2YD2250, 2YD2255-2256, 2YD2265, 2YD2267-2269, 2YD2273-2275, 2YD2282-2283, 2YD2287, 2YD2289, 2YD2291, 2YD2293, 2YD2300, 2YD2302-2303, 2YD2306-2309, 2YD2312-2314, 2YD2321-2324, 2YD2326-2328, 2YD2330-2334, 2YD2340-2342, 2YD2345-2349, 2YD2351, 2YD2353-2354, 2YD2356-2358, 2YD2360, 2YD2368-2369, 2YD2373-2375, 2YD2377-2379, 2YD2386-2392, 2YD2395-2397, 2YD2399, 2YD2402-2406, 2YD2408-2412, 2YD2417-2420, 2YD2426, 2YD2431-2435, 2YD2441-2444, 2YD2450, 2YD2453, 2YD2456, 2YD2459-2463, 2YD2465-2468, 2YD2475-2476, 2YD2486-2489, 2YD2499, 2YD2509, 2YD2517)
Parts Needed
Dealers will need to order parts for this Program.
Action Required
Remove the head and rod assemblies from the 9T9203 and 9T9204 Tilt Cylinders on the machine. Replace the 101-4118 Piston assembly and the two 6E3666 Washers with a 107-0584 Piston assembly and two 107-0576 Washers. During assembly, lubricate the piston threads and tighten the piston to 700 ± 70 Nm (520 ± 52 ft lbs). Lubricate the piston nut threads and tighten to a torque of 7500 ± 750 Nm (5550 ± 555 ft lbs). After assembling the cylinder, stamp an '07' on the part number tag to indicate that this cylinder has been reworked.
NOTE: Any dual tilt machines that were updated following the procedure outlined in the October 12, 1992 Service Magazine Article need to be reworked according to this procedure. These machines will be covered following the PIP guidelines. When filing a claim for these machines, include the work order number used when the October 12, 1992 Service Magazine work was performed.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
NOTE: This is a 8.0 hour job.
NOTE: U.S. and Canadian Dealers Only - This Program does qualify for a Type 2 SIMS Report.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
Copy Of Owner Notification For U.S. And Canadian Owners