Product Support Program For Reinforcing The Lower Elevator Linkage Pivot On Certain 613C Excavators Caterpillar

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4998" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use " T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Termination Date

Problem

The lower elevator linkage pivot may crack and pull away from the side of the bowl on certain 613C Excavators

Affected Product
Model & Identification Number

613C (92X1-Up)

Parts Needed

Not Applicable

Action Required

Refer to Special Instruction SEHS9657 "613C Elevator Lower Pivot Reinforcement ".

Service Claim Allowances

NOTE: This is an 11-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.