Usage:
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4965" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
NOTE: Although this Program is to be administered as described above on the Affected Product, Parts Stock And Dealer Exchange Units should be reworked before installation.
NOTE: This Revised Service Letter replaces the July 8, 1993 Service Letter revised August 1993. Changes have been made to the Affected Product.
Termination Date
July 31, 1994Problem
The contour seat needs to be repaired on certain D5H, D6H, D7H, D8N, D9N and D10N Track Type Tractors; D20D, D250, D300D, D40D, and D400D Articulated Trucks; 963 and 973 Track Loaders; 936F, 950F, 966F, and 980F Wheel Loaders; and on machines where replacement seats have been installed.
Affected Product
Parts Stock
Affected Product
Model & Identification Number
D5H (8RC4421-5500 1DD4312-5500 )
D6H (6CF4152-5500 5HF4158-5500 )
D7H (4FG4135-4137)
D8N (9TC6124, 9TC6127)
D9N (1JD3279-3280, 1JD3284, 1JD3294, 1JD3305, 1JD3308, 1JD3311, 1JD3330, 1JD3337)
D10N (2YD2182-2183, 2YD2208-2214, 2YD2216, 2YD3343)
D20D (9MG46-49, 9MG52-55, 9MG57, 9MG66-68, 9MG71-72)
D250D (6NG43-44, 6NG47-50, 6NG59-61, 6NG63-67, 6NG70, 6NG73-74, 6NG78, 6NG86-87, 6NG93-99, 6NG102, 6NG104-105, 6NG118, 6NG120-131, 6NG134-139)
D300D (5MG40-42, 5MG44, 5MG46, 5MG51, 5MG57-58, 5MG120-124, 5MG145, 5MG187-188)
D40D (2JJ89-92)
D400D (8TF488-495, 8TF554, 8TF557-565, 8TF571-583, 8TF585, 8TF587-596, 8TF599, 8TF602, 8TF604, 8TF606-608, 8TF612-613, 8TF619-621, 8TF623, 8TF632, 8TF635, 8TF638-640)
936F (8AJ1-288 4TK1-162 , 4TK168, 4TK180, 4TK185, 4TK192, 4TK197 9MK1-167 )
950F (7ZF1-1040 6YG1-2079 4DJ1-1095 )
963 (21Z4289-4438)
966F (4YG1-1130 8BG1-890 3XJ1-1986 , 3XJ2004, 3XJ2006-2009)
973 (86G1352-1380)
980F (5XJ1-295 8CJ1-585 3HK1-603 )
Parts Needed
Action Required
Parts Stock
Follow Steps 1 below for the suspension repair and 2 below for the seat back adjustment repair.
Affected Product
Remove the seat and suspension from the machine. Take off the seat-upper, then:
1. Follow the instructions with the 8L6860 Spring Kit for removing and installing the new springs, guide bushings (these guides are white in color), and rods (longer than the rods that were removed) in the suspension group.
2. Follow the instructions included with the 8Y5999 Adjuster Kit for installation in the seat-upper. (Use the 9U6613 Spring Compressor Tool.)
Service Claim Allowances
Parts Stock
NOTE: This is a 3 hour job per seat. Submit one claim for all Parts Stock seat reworked. If customer has a replacement seat that needs to be reworked, submit the repair as a Parts Stock claim.
When filing a claim for a Parts Stock unit use the following numbers as the Product Identification Number:
Parts Stock
- NACD Dealers - 99Z00001
- CofA Dealers - 99Z00101
- CACO Dealers - 99Z00601
- CFEL Dealers - 99Z00801
- CBSA Dealers - 99Z00201
- COSA Dealers - 99Z00401
- CofA Dealers - 99Z00101
Affected Product
NOTE: This is a 3 hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.