Front Idler and Recoil Spring - Remove
Start By:
- Separate track assemblies. Refer to Disassembly and Assembly, "Track - Separate".
- Pull the front idler and recoil spring assembly (1) partially out of the undercarriage frame. Attach a suitable lifting device to the front idler. Pull the front idler and recoil spring assembly out of the undercarriage frame until the recoil spring is exposed.
- Reposition the lifting device to the front idler and the recoil spring assembly. Remove the front idler and recoil spring assembly (1) from the undercarriage frame. The weight of the unit is approximately
81 kg (179 lb) .Show/hide tableIllustration 3 g00551670 - Position the front idler and recoil spring assembly horizontally. Block the unit in position to keep the unit from falling. Attach a suitable lifting device to recoil spring (2). Remove four bolts (3) and separate recoil spring (2) from front idler (4). The weight of the recoil spring is approximately
27 kg (60 lb) . The weight of the front idler is approximately54 kg (120 lb) .
Show/hide table
Illustration 1 | g00551666 |
Show/hide table
Illustration 2 | g00551668 |
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
G3512 Generator Set Engine Engine Oil Cooler - Assemble
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
New Oil Pan Gasket is Now Used on Certain C175 Engines {1302} New Oil Pan Gasket is Now Used on Certain C175 Engines {1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Front Seal - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Performance - Test - Engine Speed
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Sprocket - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Swivel - Remove and Install
New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061} New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Electronic Control Module (VIMS Main Module) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Pedal Control and Mounting - Remove and Installl
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000} A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Camera - Remove and Install
C175 Petroleum Engine Oil Filter Differential Pressure Problem - If Equipped with the Self-Cleaning Oil Filter
C175 Petroleum Engine Oil Pressure Is Low