Crankshaft Front Seal - Remove and Install
Start By:
- Remove the crankshaft pulley.
Note: Refer to Specifications, "Engine Design" for non-specified engine torque values.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Use a suitable pry bar to remove crankshaft front seal (1).
Show/hide table
Illustration 1 | g02795123 |
Show/hide table
Illustration 2 | g02795124 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 390-1140 | Driver | 1 |
- Position crankshaft front seal (1) on Tooling (A). Install crankshaft front seal (1) on the crankshaft.
Show/hide table
Illustration 3 | g02796112 |
Show/hide table
Illustration 4 | g02795123 |
End By:
- Install the crankshaft pulley.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Performance - Test - Engine Speed
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Hydraulic System Air - Purge
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump Air - Purge
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Hydraulic System Pressure - Release
C18 Marine Engines Maintenance Interval Schedule - Engines Rated A, B, or C
C18 Marine Engines Maintenance Interval Schedule - Engines Rated D or E
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Oil Pan - Remove and Install
140 Motor Grader Systems Location of Electrical Components (All Wheel Drive System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
140 Motor Grader Systems Location of Hydraulic Components (All Wheel Drive System)
New Oil Pan Gasket is Now Used on Certain C175 Engines {1302} New Oil Pan Gasket is Now Used on Certain C175 Engines {1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
G3512 Generator Set Engine Engine Oil Cooler - Assemble
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Sprocket - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install