Water Pump - Remove and Install
Start By:
- Remove engine.
Note: Refer to Specification UENR3421 "Engine Design" for non-specified engine Torque Values.
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02794283 - Remove bolts (2) and remove pulley (1).
Show/hide table
Illustration 2 g02794286 - Remove bolts (4).
- Remove water pump (3) and discard the gasket. Install a new gasket upon installation.
- Install water pump (3) in the reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Performance - Test - Engine Speed
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Hydraulic System Air - Purge
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump Air - Purge
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Hydraulic System Pressure - Release
C18 Marine Engines Maintenance Interval Schedule - Engines Rated A, B, or C
C18 Marine Engines Maintenance Interval Schedule - Engines Rated D or E
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Oil Pan - Remove and Install
140 Motor Grader Systems Location of Electrical Components (All Wheel Drive System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
140 Motor Grader Systems Location of Hydraulic Components (All Wheel Drive System)
G3512 Generator Set Engine Engine Oil Cooler - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Front Seal - Remove and Install
New Oil Pan Gasket is Now Used on Certain C175 Engines {1302} New Oil Pan Gasket is Now Used on Certain C175 Engines {1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
G3512 Generator Set Engine Engine Oil Cooler - Assemble
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Sprocket - Remove and Install