PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE UNDERCARRIAGE FRAME ON CERTAIN 247, 247B, 257, AND 257B MULTI-TERRAIN LOADERS
Usage:
SEBE9059-03
February 10, 2005
(Revised January 2007)
U-39
A-29
D-34
O-34
Show/hide table
| After
failure only
Parts stock action needed |
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE UNDERCARRIAGE FRAME ON CERTAIN 247, 247B, 257, AND 257B MULTI-TERRAIN LOADERS |
|
| 7050 |
PS50883
|
|
NOTE: Although this Program is to be administered as described above on the Affected Product, parts should be removed from parts stock as soon as possible.
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Revised Service Letter replaces the February 10, 2005 (Revised June 2006) Service Letter. Changes have been made to the Termination Date and Affected Product.
TERMINATION DATE
February 28, 2008PROBLEM
In certain applications, the undercarriage frame on the 247/247B/257/257B multi-terrain loaders may crack where the track adjuster is mounted to the frame. This crack can not be weld repaired and must be replaced. See the following graphic for the location of the cracks.
Arrow indicates area that cracks.
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 247 |
|
| 247B |
|
| 257 |
|
| 257B |
|
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2520440 | FRAME AS. |
ACTION REQUIRED
Remove all 2063811 and 2185699 FRAME AS. from parts stock.
***** Affected Product *****
Reference RENR4859 Dissassembly and Assembly Manual for replacing the undercarriage frame on the 247 or 257 machines. Reference RENR4874 Dissassembly and Assembly Manual for replacing the undercarriage frame on the 247B or 257B machines.
SERVICE CLAIM ALLOWANCES
Submit one claim for all 2063811 and 2185699 FRAME AS. removed from parts stock.
***** Affected Product *****
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
0-36 mos |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handlingCaterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SAW DRIVE SHAFT TO PREVENT VIBRATION OR BREAKAGE ON CERTAIN HF181, HF201, HF202, HF221 AND HF222 FELLING HEADS PRODUCT SUPPORT PROGRAM FOR UPDATING THE SAW DRIVE SHAFT TO PREVENT VIBRATION OR BREAKAGE ON CERTAIN HF181, HF201, HF202, HF221 AND HF222 FELLING HEADS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SWING FRAME ASSEMBLY ON CERTAIN 416D, 420D, 424D, 428D, 432D, 438D, AND 442D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SWING FRAME ASSEMBLY ON CERTAIN 416D, 420D, 424D, 428D, 432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE CABLE THAT MAY BIND ON CERTAIN 416D, 420D, 420D IT, 430D, AND 430D IT BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE CABLE THAT MAY BIND ON CERTAIN 416D, 420D, 420D IT, 430D, AND 430D IT BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING THE RUBBING OF HOSES ON FUEL LINES ON CERTAIN 416D BACKHOE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING THE RUBBING OF HOSES ON FUEL LINES ON CERTAIN 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REORIENTING THE CLAMP FOR THE LOWER RADIATOR COOLANT HOSE ON CERTAIN 12H AND 140H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REORIENTING THE CLAMP FOR THE LOWER RADIATOR COOLANT HOSE ON CERTAIN 12H AND 140H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS FROM SERVICE PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS FROM SERVICE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW VALVE COVER HEAT SHIELD ON CERTAIN 824G SERIES II WHEEL DOZERS, 825G SERIES II SOIL COMPACTORS, 826G SERIES II LANDFILL COMPACTORS AND 980G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW VALVE COVER HEAT SHIELD ON CERTAIN 824G SERIES II WHEEL DOZERS, 825G SERIES II SOIL COMPACTORS, 826G SERIES II LANDFILL COMPACTORS AND 980G SERIES II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM CHAIN SHACKLES ON CERTAIN TH580B TELEHANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM CHAIN SHACKLES ON CERTAIN TH580B TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1053025, 1053030, AND 1017368 VALVES IN PARTS STOCK AND REMOVING THEM IF NECESSARY PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1053025, 1053030, AND 1017368 VALVES IN PARTS STOCK AND REMOVING THEM IF NECESSARY
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROPS ON CERTAIN CP-663E, CS-663E, AND CS-683E VIBRATORY SOIL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROPS ON CERTAIN CP-663E, CS-663E, AND CS-683E VIBRATORY SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED FINAL DRIVE HOUSINGS ON CERTAIN 120H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED FINAL DRIVE HOUSINGS ON CERTAIN 120H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C9 MACHINE AND INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C9 MACHINE AND INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FENDERS ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FENDERS ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A RELAY IN THE THE HYDRAULIC LOCKOUT CONTROL CIRCUIT ON CERTAIN TK711 AND TK721 TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A RELAY IN THE THE HYDRAULIC LOCKOUT CONTROL CIRCUIT ON CERTAIN TK711 AND TK721 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS