PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
Usage:
SEBE9034-01
January 11, 2005
(Revised May 2005)
U-17
A-13
D-136
O-141
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS |
|
| 3005 3081 |
PS41747
|
|
NOTE: The information supplied in this service
letter may not be valid after the termination date of this program. Do
not perform the work outlined in this Service Letter after the termination
date without first contacting your Caterpillar product analyst.
- NOTE: Mail Codes D-136 and O-141 are not in order since
- they were added in the May, 2005 Revision.
NOTE: This Revised Service Letter replaces the January 11, 2005 Service Letter. Changes have been made to the Title, Affected Product, and Parts Needed.
TERMINATION DATE
January 31, 2007PROBLEM
The clip that holds the transmission fill tube in position may break on certain D-Series Backhoe Loaders and D-Series Integrated Toolcarriers. A vibration has been identified that can be eliminated by adding this additional supporting clip.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 416D |
B2D001-1277 |
| 420D |
|
| 424D | RXA001-1534
|
| 428D | DSX001-617
BXC001-1306
|
| 430D |
|
| 420D IT |
|
| 430D IT |
|
| 432D | TDR001-392
|
| 442D | TBD001-310
|
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 5P4116 | WASHER |
| 2 | 8S0023 | CLIP |
| 2 | 8S0024 | CLIP |
| 1 | 7X2537 | BOLT |
| 1 | 1984776 | WASHER-HARD |
ACTION REQUIRED
Check the existing clips. Replace if necessary. Install a third clip and associated hardware.
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
0-24 mos |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROPS ON CERTAIN CP-663E, CS-663E, AND CS-683E VIBRATORY SOIL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROPS ON CERTAIN CP-663E, CS-663E, AND CS-683E VIBRATORY SOIL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REINSTALLING THE AIR INLET HOSE THAT MAY BECOME DETACHED ON CERTAIN 424D, 428D, 432D, AND 442D BACKHOE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REINSTALLING THE AIR INLET HOSE THAT MAY BECOME DETACHED ON CERTAIN 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED EXHAUST TUBING ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED EXHAUST TUBING ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE PLANET SHAFTS ON CERTAIN 836G LANDFILL COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE PLANET SHAFTS ON CERTAIN 836G LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE BOLTS IN THE TORSIONAL COUPLER OF CERTAIN 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE BOLTS IN THE TORSIONAL COUPLER OF CERTAIN 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC FAN LINES WITH HOSES ON CERTAIN 826G SERIES II LANDFILL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC FAN LINES WITH HOSES ON CERTAIN 826G SERIES II LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR HOSE BETWEEN THE AIR FILTER AND MANIFOLD ON CERTAIN CB-214D, CB-214E, CB-224D, CB-224E, CB-225D, AND CB-225E ASPHALT COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR HOSE BETWEEN THE AIR FILTER AND MANIFOLD ON CERTAIN CB-214D, CB-214E, CB-224D, CB-224E, CB-225D, AND CB-225E ASPHALT COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE ENCLOSURE PROP ROD MECHANISM ON CERTAIN CB434D AND CB534D ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE ENCLOSURE PROP ROD MECHANISM ON CERTAIN CB434D AND CB534D ASPHALT COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PUMP DISCHARGE HOSE ON CERTAIN 938G SERIES II WHEEL LOADERS AND IT38G SERIES II INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PUMP DISCHARGE HOSE ON CERTAIN 938G SERIES II WHEEL LOADERS AND IT38G SERIES II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION IN CERTAIN 735 ARTICULATED TRUCKS DUE TO A FAILURE OF THE #2 CLUTCH HUB PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION IN CERTAIN 735 ARTICULATED TRUCKS DUE TO A FAILURE OF THE #2 CLUTCH HUB
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BEVEL GEAR GROUP ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BEVEL GEAR GROUP ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1053025, 1053030, AND 1017368 VALVES IN PARTS STOCK AND REMOVING THEM IF NECESSARY PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1053025, 1053030, AND 1017368 VALVES IN PARTS STOCK AND REMOVING THEM IF NECESSARY
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM CHAIN SHACKLES ON CERTAIN TH580B TELEHANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM CHAIN SHACKLES ON CERTAIN TH580B TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW VALVE COVER HEAT SHIELD ON CERTAIN 824G SERIES II WHEEL DOZERS, 825G SERIES II SOIL COMPACTORS, 826G SERIES II LANDFILL COMPACTORS AND 980G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW VALVE COVER HEAT SHIELD ON CERTAIN 824G SERIES II WHEEL DOZERS, 825G SERIES II SOIL COMPACTORS, 826G SERIES II LANDFILL COMPACTORS AND 980G SERIES II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS FROM SERVICE PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS FROM SERVICE
PRODUCT SUPPORT PROGRAM FOR REORIENTING THE CLAMP FOR THE LOWER RADIATOR COOLANT HOSE ON CERTAIN 12H AND 140H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REORIENTING THE CLAMP FOR THE LOWER RADIATOR COOLANT HOSE ON CERTAIN 12H AND 140H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING THE RUBBING OF HOSES ON FUEL LINES ON CERTAIN 416D BACKHOE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING THE RUBBING OF HOSES ON FUEL LINES ON CERTAIN 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE CABLE THAT MAY BIND ON CERTAIN 416D, 420D, 420D IT, 430D, AND 430D IT BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE CABLE THAT MAY BIND ON CERTAIN 416D, 420D, 420D IT, 430D, AND 430D IT BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SWING FRAME ASSEMBLY ON CERTAIN 416D, 420D, 424D, 428D, 432D, 438D, AND 442D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SWING FRAME ASSEMBLY ON CERTAIN 416D, 420D, 424D, 428D, 432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SAW DRIVE SHAFT TO PREVENT VIBRATION OR BREAKAGE ON CERTAIN HF181, HF201, HF202, HF221 AND HF222 FELLING HEADS PRODUCT SUPPORT PROGRAM FOR UPDATING THE SAW DRIVE SHAFT TO PREVENT VIBRATION OR BREAKAGE ON CERTAIN HF181, HF201, HF202, HF221 AND HF222 FELLING HEADS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE UNDERCARRIAGE FRAME ON CERTAIN 247, 247B, 257, AND 257B MULTI-TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE UNDERCARRIAGE FRAME ON CERTAIN 247, 247B, 257, AND 257B MULTI-TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED FINAL DRIVE HOUSINGS ON CERTAIN 120H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING CRACKED FINAL DRIVE HOUSINGS ON CERTAIN 120H MOTOR GRADERS