Usage:
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI1231" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T " as the SIMS Description Code. Exception: If the repair is done after failure, use "PI1231" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and " Z" as the SIMS Description Code.
Problem
The 5L9018 Bolts used to fasten the brake manifolds to the rear axle may fail on certain 416B, 426B, 428B, 436B and 438B Backhoe Loaders and need to be replaced.
Affected Product
Model & Identification Number
416B (8ZK1-409, 8ZK411-420, 8ZK422, 8ZK423, 8ZK427-429, 8ZK432-434, 8ZK437, 8ZK438, 8ZK441; 8SG1-3436, 8SG3438-3440, 8SG3443-3448, 8SG3453, 8SG3454, 8SG3460-3464, 8SG3467-3469, 8SG3472, 8SG3473, 8SG3475)
426B (5YJ1-883, 5YJ885-887)
428B (7EJ1-1440, 7EJ1477-1516, 7EJ1518, 7EJ1521-1533, 7EJ1536, 7EJ1538, 7EJ1540, 7EJ1541)
436B (6MJ1-419, 6MJ421, 6MJ425)
438B (3KK1-627, 3KK629, 3KK631-697, 3KK699-710, 3KK712-714)
Parts Needed
Dealers will need to order parts for this Program.
- 4 - 5L9018 Bolt
Action Required
Remove the existing 5L9018 Bolts and replace them with new 5L9018 Bolts, one at a time, to avoid allowing air into the brake system. Refer to the illustration below:
Location of Rear Axle Brake Manifold Bolts
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
NOTE: This is a .5-hour job.
NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
Copy Of Owner Notification For U.S. And Canadian Owners