Blade
Usage:
Remove & Install Blade
1. Park the machine on a solid, level surface. Lower the blade.
2. Remove snap ring (2). Drive out pin (3) from cylinder (1).
3. Repeat Step 2 for the other cylinder.
4. Attach a hoist. Remove two bolts (4) and pivot clamp (5) from both sides of the machine.
5. Using a hoist, lift the blade away from the machine. The weight of the blade is 248 kg (550 lb).
NOTE: Install in reverse order.
Caterpillar Information System:
CB-434 VIBRATORY COMPACTOR HYDRAULIC SYSTEM Schematic
PR-450 PAVEMENT PROFILER ELECTRICAL DIAGRAMS Schematic
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Water Temperature Regulator
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Water Pump
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Vibration Damper
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Throttle Linkage
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Oil Cooler Thermostatic Valve
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Starter
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Speed Sensor
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Radiator & Oil Cooler Cowling
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Radiator
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Right Side Engine Cowling
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Blade Cylinder
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Leveling Blade Control Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Scraper
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Vibratory Motor
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Drum
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Vibratory Arm
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Drum Motor
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Pivot Assembly
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering Cylinder
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Rops
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Flow Divider