Alternator - Remove and Install
Start By:
- Remove lower fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove and Install (Lower Fan Drive)".
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g06292833 - Loosen tensioner (1) and remove V-belt (2) from the alternator.
- Disconnect harness assemblies (3) from the alternator.
Show/hide table
Illustration 2 g06292859 - Remove bolt (4) and bolt (6).
- Remove alternator (5) from the mounting group.
- Position alternator (5) on the mounting group.
- Install bolt (4) and bolt (6).
Show/hide table
Illustration 4 g06292833 - Connect the harness assemblies to alternator (5). Refer to Specifications, "Alternator and Regulator".
- Install V-belt (1) on alternator (3).
- Adjust the tension on the V-belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
- Turn the battery disconnect switch to the ON position.
Show/hide table
Illustration 3 | g06292859 |
End By:
- Install lower fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove and Install (Lower Fan Drive)".
Caterpillar Information System:
336 Excavator Machine Systems Camera - Remove and Install - Right Camera
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Oil Makeup (Swing System)
336 Excavator Machine Systems Camera - Remove and Install - Front Camera
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Bucket Cylinder
336 Excavator Machine Systems Camera - Remove and Install - Left Camera
307, 308, 309 and 310 EXCAVATOR Stick Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pedal Control (Auxiliary)
307, 308, 309 and 310 EXCAVATOR Stick Lines
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Relief Valve (Swing)
C27 and C32 Generator Set Engines Engine Support (Front) - Remove and Install
TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T} TA2 Technical Inspection for C32 Generator Set Engines {1087, 1088, 1250, 1350, 7002, 753T}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Travel System)
307, 308, 309 and 310 EXCAVATOR Operator Platform
307, 308, 309 and 310 EXCAVATOR Pilot Lines
307, 308, 309 and 310 EXCAVATOR Refrigerant Compressor
336 Excavator Machine Systems Position Sensor (Swing) - Remove and Install
C27 and C32 Generator Set Engines Belt Guard - Remove and Install - Alternator
C27 and C32 Generator Set Engines Belt Guard - Remove and Install - Fan Drive
336 Excavator Machine Systems Accumulator - Remove and Install
307, 308, 309 and 310 EXCAVATOR Return Lines
307, 308, 309 and 310 EXCAVATOR Track Roller Mounting
307, 308, 309 and 310 EXCAVATOR Sprocket
Improved Transmission Software Is Now Used on Certain TH55FT-E70 and TH55-E90 Transmissions {3168, 7490, 7610, 7620} Improved Transmission Software Is Now Used on Certain TH55FT-E70 and TH55-E90 Transmissions {3168, 7490, 7610, 7620}