Pilot Lines
Show/hide table
Illustration 1 | g06162839 |
Show/hide table
Specification for 417-2287 Pilot Lines Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 148-8435 Tee As | Torque to |
2 | 1 | 150-4044 Connector As | Torque to |
3 | 1 | 150-3036 Elbow As | Torque to |
4 | 3 | 148-8378 Elbow As | Torque to |
5 | 2 | 148-8336 Connector As | Torque to |
- | 10 | 7K-1181 Cable Strap | Sharp corners at the cutting edge of each cable strap shall not be allowed. |
Caterpillar Information System:
CX38-P892 Well Servicing Transmission Maintenance Interval Schedule
Improved Radiator Fan Shaft Assembly Procedure Implemented in Production of C175 and 3500 Generator Sets {1353, 1356} Improved Radiator Fan Shaft Assembly Procedure Implemented in Production of C175 and 3500 Generator Sets {1353, 1356}
XQP500 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
XQP500 Generator Sets Fuel System Secondary Filter - Replace
CX38-P892 Well Servicing Transmission Transmission Oil Sample - Obtain
CX38-P892 Well Servicing Transmission Transmission Oil Level - Check
CX38-P892 Well Servicing Transmission Transmission Oil - Change
New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053} New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053}
CX38-P892 Well Servicing Transmission Oil Filter (Transmission) - Replace
CX38-P892 Well Servicing Transmission Breather (Transmission) - Clean
C9.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CX38-P892 Well Servicing Transmission Plate Locations and Film Locations
C7.1 Marine Propulsion Engine Plate Locations and Film Locations
C175 Tier 4 Final Engines for Off-Highway Trucks NOx Conversion Is Low
C7.1 Marine Propulsion Engine Emissions Certification Film
C7.1 Marine Propulsion Engine Product Lifting
C12.9 Marine Propulsion Engine Turbocharger - Inspect
New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702} New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702}
3516B Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurrence
C12.9 Marine Propulsion Engine Air Inlet and Exhaust System - Inspect
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Remove
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Install
New Front Window Group Is Now Available for Certain Excavators {7310} New Front Window Group Is Now Available for Certain Excavators {7310}
C12.9 Marine Propulsion Engine Cooling System - Test