Transmission Oil Level - Check
Check the oil level of the transmission under the following conditions:
- The transmission oil is warmed to operating temperature.
- The engine is at LOW IDLE.
- The transmission is in NEUTRAL.
- The vehicle is on level ground.
Also read the Oil Level Check instruction in the Transmission Control section which explains the Shift Pad function while the oil level is being determined. Illustration 21 of the Transmission Control section provides a description of the Shift Pad characters for checking the transmission oil.
- Remove dipstick (1) and check the oil level with the oil warm and the transmission in the NEUTRAL position.
- Stop engine, if necessary, add oil.
- Install dipstick.
Show/hide table
Illustration 1 | g06162724 |
(1) Filler Tube and Dipstick |
Caterpillar Information System:
CX38-P892 Well Servicing Transmission Transmission Oil - Change
New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053} New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053}
CX38-P892 Well Servicing Transmission Oil Filter (Transmission) - Replace
CX38-P892 Well Servicing Transmission Breather (Transmission) - Clean
C9.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CX38-P892 Well Servicing Transmission Plate Locations and Film Locations
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408} 2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
C175 Generator Sets Engine Oil and Filter - Change
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408} New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Engines {1290, 1408}
CX38-P892 Well Servicing Transmission Specifications
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Is Low
CX38-P892 Well Servicing Transmission Safety Messages
CX38-P892 Well Servicing Transmission Transmission Oil Sample - Obtain
XQP500 Generator Sets Fuel System Secondary Filter - Replace
XQP500 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
Improved Radiator Fan Shaft Assembly Procedure Implemented in Production of C175 and 3500 Generator Sets {1353, 1356} Improved Radiator Fan Shaft Assembly Procedure Implemented in Production of C175 and 3500 Generator Sets {1353, 1356}
CX38-P892 Well Servicing Transmission Maintenance Interval Schedule
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Pilot Lines
C7.1 Marine Propulsion Engine Plate Locations and Film Locations
C175 Tier 4 Final Engines for Off-Highway Trucks NOx Conversion Is Low
C7.1 Marine Propulsion Engine Emissions Certification Film
C7.1 Marine Propulsion Engine Product Lifting
C12.9 Marine Propulsion Engine Turbocharger - Inspect
New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702} New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702}