Improved Radiator Fan Shaft Assembly Procedure Implemented in Production of C175 and 3500 Generator Sets {1353, 1356}
- Electric Power Generation
- 3516C GEN SET (S/N: SBK1-502,700-1472,2000-2201)
- C175-16 GEN SET (S/N: WYB1-112,114-118,124-129,131-131,135-136,138-454,456-574,576-677,680-680,682-682,1000-2018)
- Engine
- 3512C (S/N: YBD1-176,178-312,314-486,512-527; SBG1-1384)
- 3516C (S/N: SBJ1-1474,2000-2084; SEK1-1280)
- C175-16 (S/N: WYC1-126,1000-1012,2000-2011)
- C175-20 (S/N: BXR1-103,1000-1256,1761-1883)
- 3516C (S/N: SBJ1-1474,2000-2084; SEK1-1280)
- Generator Set
- 3516E (S/N: LCK1-118)
Description Of Change: Radiator supplier is following improved assembly process for alignment and torquing set screws that secure the fan shaft pillow block bearings on the shaft. Refer to Special Instructions, M0078728 for details.
Adaptable To: This change is adaptable to the engines that are listed above.
Caterpillar Information System:
XQP500 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
XQP500 Generator Sets Fuel System Secondary Filter - Replace
CX38-P892 Well Servicing Transmission Transmission Oil Sample - Obtain
CX38-P892 Well Servicing Transmission Transmission Oil Level - Check
CX38-P892 Well Servicing Transmission Transmission Oil - Change
New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053} New Turbocharger Shaft Seal is Used on Certain C175-16 Locomotive Engine {1052, 1053}
CX38-P892 Well Servicing Transmission Oil Filter (Transmission) - Replace
CX38-P892 Well Servicing Transmission Breather (Transmission) - Clean
C9.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CX38-P892 Well Servicing Transmission Plate Locations and Film Locations
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408} 2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
C175 Generator Sets Engine Oil and Filter - Change
CX38-P892 Well Servicing Transmission Maintenance Interval Schedule
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Pilot Lines
C7.1 Marine Propulsion Engine Plate Locations and Film Locations
C175 Tier 4 Final Engines for Off-Highway Trucks NOx Conversion Is Low
C7.1 Marine Propulsion Engine Emissions Certification Film
C7.1 Marine Propulsion Engine Product Lifting
C12.9 Marine Propulsion Engine Turbocharger - Inspect
New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702} New Fuel Manifold and Lines Groups Are Now Used For Certain 3516B Locomotive Engines {1274, 1702}
3516B Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurrence
C12.9 Marine Propulsion Engine Air Inlet and Exhaust System - Inspect
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Remove
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Install