New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920}
- Industrial Engine
- C9 INDUSTRIAL (S/N: REH1-7929)
Description Of Change: The new software allows high-speed governor control speed while using TSC 1 torque control.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new 478-3761 Engine Software replaces the former 397-1642 Engine Software.
The new software is adaptable to the above engines back to first production.
Caterpillar Information System:
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
G3512 Generator Set Engine Electric Starting Motor - Remove and Install
The Cover Assemblies Have Been Updated That Are Now Used on the Clean Emission Module (CEM) For Certain 3516 Generator Set Engines {1062, 1091} The Cover Assemblies Have Been Updated That Are Now Used on the Clean Emission Module (CEM) For Certain 3516 Generator Set Engines {1062, 1091}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439} Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Supply - Test
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Signal (Analog, Passive) - Test
3500C Marine Engines Turbocharger
G3512 Generator Set Engines Crankcase Pressure Is Low
New Software Is Now Used for Certain C175-16 Engines {1920} New Software Is Now Used for Certain C175-16 Engines {1920}
Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256} Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256}
C13 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308} A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308}
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290} Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290}
A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064} A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Service Tools
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Service Information Report
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
C175-16 Locomotive Engines Maintenance Recommendations
PS097S and PS104S POWER SYSTEMS Machine Systems Electric Motor (Hydraulic Pump)
C175-16 Locomotive Engines Fuel System Primary Filter/Water Separator - Clean/Replace
3512E and 3516E Marine Engines Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
PS097S and PS104S POWER SYSTEMS Machine Systems Pump Drive
PS097S and PS104S POWER SYSTEMS Machine Systems Wheel and Mounting