3500C Marine Engines Caterpillar


Turbocharger

Usage:

3512C MXP


图 1g06113250

表 1
技术规格 - 468-2949 涡轮增压器总成 
项目  数量  零件  技术规格说明 
12  293-5490 螺栓  装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹。
拧紧至扭矩为 40 ± 2 N·m (30 ± 1 lb ft)。 
332-0971 螺塞组件  拧紧至扭矩为 15.5 ± 1.5 N·m (137.2 ± 13.3 lb in)。 
18  470-3799 螺栓  装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹。
拧紧至扭矩为 40 ± 2 N·m (30 ± 1 lb ft)。 

Caterpillar Information System:

G3512 Generator Set Engines Crankcase Pressure Is Low
New Software Is Now Used for Certain C175-16 Engines {1920} New Software Is Now Used for Certain C175-16 Engines {1920}
Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256} Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256}
C13 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308} A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308}
C175-16 Petroleum Generator Set Engines Engine Operation
C13 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Signal (Analog, Active) - Test
C18 Marine Auxiliary and Marine Generator Set Engines Indicator Lamp - Test
C18 Marine Auxiliary and Marine Generator Set Engines Electrical Power Supply - Test
C18 Marine Auxiliary and Marine Generator Set Engines Coolant Level - Test
C18 Marine Auxiliary and Marine Generator Set Engines Cat Data Link - Test
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Signal (Analog, Passive) - Test
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Supply - Test
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439} Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
The Cover Assemblies Have Been Updated That Are Now Used on the Clean Emission Module (CEM) For Certain 3516 Generator Set Engines {1062, 1091} The Cover Assemblies Have Been Updated That Are Now Used on the Clean Emission Module (CEM) For Certain 3516 Generator Set Engines {1062, 1091}
G3512 Generator Set Engine Electric Starting Motor - Remove and Install
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920} New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920}
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290} Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290}
A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064} A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Service Tools
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Service Information Report
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.