Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 468-8116 | 套筒 | 1 |
注: 参考专门说明书, REHS8151, "NOx 传感器处理和安装程序",了解有关氮氧化物传感器拆卸和安装的更多信息。
- 拆下螺栓 (1) 和盖 (2)。
Show/hide table
图 2 g06090726 - 断开线束组件 (4)。 拆下螺栓 (3 )。
Show/hide table
图 3 g06090483 - 拆下电缆带 (5)
Show/hide table
图 4 g06090732 - 使用工具 (A) 拆下氮氧化物传感器 (6)。
Show/hide table
图 1 | g06090349 |
- 按与拆卸相反的顺序安装氮氧化物传感器 (6)。
- 将氮氧化物传感器 (6) 拧紧至扭矩为
50 ± 10 N·m (37 ± 7 lb ft) 。
- 将氮氧化物传感器 (6) 拧紧至扭矩为
Caterpillar Information System:
C175-16 Locomotive Engines Fuel System Primary Filter/Water Separator - Clean/Replace
PS097S and PS104S POWER SYSTEMS Machine Systems Electric Motor (Hydraulic Pump)
C175-16 Locomotive Engines Maintenance Recommendations
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Service Information Report
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Service Tools
A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064} A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064}
Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290} Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290}
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920} New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920}
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
G3512 Generator Set Engine Electric Starting Motor - Remove and Install
PS097S and PS104S POWER SYSTEMS Machine Systems Pump Drive
PS097S and PS104S POWER SYSTEMS Machine Systems Wheel and Mounting
C4.4 Marine Generator Set Safety Messages
G3512 Generator Set Engine Exhaust Elbow - Remove and Install
C4.4 Marine Generator Set Model View Illustrations
C4.4 Marine Generator Set Plate Locations and Film Locations
C4.4 Marine Generator Set Control Panel - Protection and Paralleling Unit (PPU) Control Panel (if equipped)
C4.4 Marine Generator Set Control Panel - Premium Control Panel, and MCS Control Panel
New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510} New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank