PS097S and PS104S POWER SYSTEMS Machine Systems Caterpillar


Pump Drive

Usage:

HPU300 AP3


Illustration 1g06114662

Table 1
Specification for 484-7152 Pump Drive Gp 
Item  Qty  Part  Specification Description 
105-3484 Bolt  Before assembly. apply Loctite S2420 or VaryBond 12-43.
Torque to 45 N·m (33 lb ft)
484-7151 Hex Socket Screw  Before assembly. apply Loctite S2420 or VaryBond 12-43.Torque to 65 N·m (48 lb ft)

Caterpillar Information System:

3512E and 3516E Marine Engines Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
C175-16 Locomotive Engines Fuel System Primary Filter/Water Separator - Clean/Replace
PS097S and PS104S POWER SYSTEMS Machine Systems Electric Motor (Hydraulic Pump)
C175-16 Locomotive Engines Maintenance Recommendations
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Service Information Report
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Service Tools
A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064} A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064}
Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290} Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290}
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920} New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920}
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
PS097S and PS104S POWER SYSTEMS Machine Systems Wheel and Mounting
C4.4 Marine Generator Set Safety Messages
G3512 Generator Set Engine Exhaust Elbow - Remove and Install
C4.4 Marine Generator Set Model View Illustrations
C4.4 Marine Generator Set Plate Locations and Film Locations
C4.4 Marine Generator Set Control Panel - Protection and Paralleling Unit (PPU) Control Panel (if equipped)
C4.4 Marine Generator Set Control Panel - Premium Control Panel, and MCS Control Panel
New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510} New By-pass Valve Actuators Are Now Used on Certain G3500 Engines {1078, 5510}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Early Wear
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.