C4.4 and C7.1 Engines Caterpillar


Coolant Level Is Low

Usage:

525D 2L5
此步骤仅适用于带冷却液液位传感器的发动机。

此步骤涉及以下诊断代码:

表 1
冷却液液位低故障诊断代码 
J1939 代码  CDL 代码  代码说明
(代码说明可能不同) 
注释 
111-1  E2143-3  发动机冷却液液位:低 - 液位 3  发动机已运行 60 秒。 发动机冷却液液位降至冷却液液位传感器以下已达到规定的延迟时间。
发动机功率减额。 记录该代码。 
111-18  E2143-2  发动机冷却液液位:低 - 液位 2  发动机已运行 60 秒。 发动机冷却液液位降至冷却液液位传感器以下已达到规定的延迟时间。
发动机功率减额。 记录该代码。 

可能原因

  • 冷却液液位低和/或冷却液泄漏

  • 冷却液液位传感器

建议的措施

注: 下面以概率的先后顺序列出了这些步骤。 依次完成这些步骤。

表 2
故障诊断与排除测试步骤  数值  结果 

1. 冷却液液位低和/或冷却液泄漏

A. 检查冷却液液位。
 

冷却液液位
 

结果:发动机冷却液液位正常。

转至测试步骤 2。

结果:发动机冷却液液位不正常。

修理:对冷却液液位不当的原因进行故障诊断与排除。

检查防冻液和水的混合是否正确。 参考操作和保养手册。

检查冷却系统有无泄漏。 参考系统操作/测试和调整, "冷却系统 - 测试",以了解正确的步骤。 立即修理所有泄漏。

检查冷却系统中有无空气。 参考系统操作/测试和调整, "测试冷却系统",以了解正确的步骤。
 

2. 传感器有故障

A. 如果怀疑冷却液液位传感器存在电气故障,请参阅故障诊断与排除, "冷却液液位 - 测试",了解有关冷却液液位传感器的故障排除信息。
 

冷却液液位传感器
 

结果:冷却液液位传感器工作异常。

修理:更换冷却液液位传感器。

结果:冷却液液位传感器工作正常。

请联系代理商解决方案网络 (DSN)。
 

Caterpillar Information System:

239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Crankcase Breather - Remove and Install
Single Piece Oil Pan Rework for Certain D8T Track-Type Tractors and Pipelayers {1302} Single Piece Oil Pan Rework for Certain D8T Track-Type Tractors and Pipelayers {1302}
D6N Track-Type Tractor Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
C4.4 and C7.1 Engines Event Codes
C4.4 and C7.1 Engines Acceleration Is Poor or Throttle Response Is Poor
C4.4 and C7.1 Engines Diagnostic Trouble Codes
C4.4 and C7.1 Engines Configuration Parameters
AD30, AD45B, AD55 and AD60 Underground Articulated Trucks VIMS, Monitoring and Payload MID 162 - CID 0590 - FMI 09
Disassembly and Assembly Procedures for Idlers of D3K, D4K, and D5K Series Track Type Tractors {0374, 0599, 0729, 4159} Disassembly and Assembly Procedures for Idlers of D3K, D4K, and D5K Series Track Type Tractors {0374, 0599, 0729, 4159}
Installation of 484-6924 Guard Kit on Certain 950M and 962M Medium Wheel Loaders{7051, 7150, 7253} Installation of 484-6924 Guard Kit on Certain 950M and 962M Medium Wheel Loaders{7051, 7150, 7253}
Installation of 481-5592 Kit - Guard on Certain 966M Wheel Loaders{5104, 5133, 7150} Installation of 481-5592 Kit - Guard on Certain 966M Wheel Loaders{5104, 5133, 7150}
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Remove and Install
D6R2 Track-Type Tractor Daily Inspection
C4.4 and C7.1 Engines Coolant Temperature Is High
953K and 963K Track-Type Loader Systems HVAC, Control System
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Disassemble
2015/05/22 New Machine Software Is Now Available For Certain D6K Track-Type Tractors For Blade Lower Control {7610, 7620}
3516E Engine for 994K Wheel Loaders Coolant Level - Test
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Assemble
903C2 Compact Wheel Loader Cooling System Coolant (ELC) - Change
D3K2, D4K2 and D5K2 Track-Type Tractors Stopping the Engine if an Electrical Malfunction Occurs
966H and 972H Wheel Loaders Maintenance Interval Schedule
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine - Remove and Install
Procedure to Rework the Upper Drive Shaft on AD30 Underground Articulated Trucks {3253} Procedure to Rework the Upper Drive Shaft on AD30 Underground Articulated Trucks {3253}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.