- Wheel Loader
- 966M (S/N: EJA1-UP; DYC1-UP; LMM1-UP; KJP1-UP)
- 966M Series XE (S/N: P6C1-UP)
- 972M (S/N: LSJ1-UP; GGN1-UP; A8P1-UP; JPR1-UP)
- 972M Series XE (S/N: EDW1-UP)
- 966M Series XE (S/N: P6C1-UP)
Introduction
This Special Instruction will provide information on the installation of 484-6927 Guard Kit.
Do not perform any procedure in this publication or order any parts until you understand the information that is contained in this publication.
Safety Section
Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in injury or death. Do not operate or perform any lubrication, maintenance or repair on this product, until you have read and understood the operation, lubrication, maintenance and repair information. |
Use an appropriate lifting device that is rated for the specific load. Failure to do so can result in serious injury or death. |
Required Parts
Required Parts For 484-6927 Guard Kit | |||
---|---|---|---|
Item | Qty | Part Number | Part Description |
1 | 8 | Guard As | |
2 | 8 | Plate | |
3 | 32 | Hard Washer | |
4 | 32 | Hard Washer | |
5 | 32 | Bolt | |
6 | 32 | Bolt |
Axle Preparation
Illustration 1 | g06056019 |
Dimensions for machining new holes (A) (B) (C) (D) (E) M10 x 1.5 |
Use the dimensions shown in Illustration 1 to machine 8 holes into each axle shaft in order to mount the guard assemblies.
Location
Illustration 2 | g03741007 |
Bottom view |
Installation Procedure
- Install guard assemblies (1).
Show/hide table
Illustration 4 g03875063 View of plate installation
(4)392-3950 Plate
(5)8T-4121 Hard Washer
(6)8T-4196 Bolt - Install plates (4).
Illustration 3 | g03875062 |
View of guard assemblies (1) (2) (3) |