Cylinder Head - Remove
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 138-7575 | 连杆支架 | 1 |
开始:
- 拆下摇臂和摇臂轴。 请参阅拆解和组装, "摇臂和摇臂轴 - 拆卸"。
- 拆下气门机构罩盖底座。 请参阅拆解和组装, "气门机构罩盖底座 - 拆卸和安装"。
- 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 将冷却液从冷却系统中排入合适的容器,以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
Show/hide table
图 1 g01273491 - 拆下螺栓 (2),然后拆下支架组件 (3)。 断开电缆组件 (1)。 断开软管组件 (4)。
Show/hide table
图 2 g01177926 - 断开线束组件 (5)、 (6) 和 (7)。
- 从涡轮增压器上断开管组件 (8)。
- 断开软管组件 (9)。
- 拆下螺栓 (10)。
Show/hide table
图 3 g01177988 注: 注意不要损坏喷油器端部。
- 将工具 (A) 和适当的起吊设备固定到缸盖 (11)。 缸盖 (11) 的重量约为
181 kg (400 lb) 。 拆下缸盖 (11) 和密封垫。
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Turbocharger - Install
C13 On-highway Engine Front Housing and Covers
C9 Engine for Caterpillar Built Machines Turbocharger - Remove
C15 On-Highway Engine Crankshaft
C9 Generator Set Model View Illustrations
C9 Generator Set Plate Locations and Film Locations
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Safety Messages
C15 On-Highway Engine Camshaft
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
C2.2 Generator Sets Control Panel
C7 and C9 On-highway Engines Fuel System - Prime
C15 On-Highway Engine Electronic Unit Injector
2006/02/06 A New Exhaust Manifold Gasket is Used {1059}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
C2.2 Generator Sets Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
C9 Engine for Caterpillar Built Machines Cylinder Head - Install
C-10 Petroleum Engine Engine Oil Pump - Remove
C280 Marine and Petroleum Engines Engine Speed/Timing Sensor
C3.3 and C4.4 Rental Generator Sets Stopping the Engine
C6.6 Industrial Engine Introduction
C-10 Petroleum Engine Engine Oil Pump - Disassemble