Travel Counterbalance Valve
Show/hide table
| 图 1 | g01435184 |
(1) 两颗螺塞的扭矩 ... 190 ± 20 N·m (140 ± 15 lb ft)
(2) 173-3524 弹簧
- 数量 ... 2
- 自由长度 ... 60 mm (2.4 in)
- 外径 ... 25 mm (1.0 in)
- 自由长度 ... 60 mm (2.4 in)
(3) 两颗螺塞的扭矩 ... 17 ± 2 N·m (13 ± 1 lb ft)
(4) 两颗螺塞的扭矩 ... 53 ± 3 N·m (39 ± 2 lb ft)
Show/hide table
| 图 2 | g01435191 |
剖面 A-A | |
(5) 螺塞的扭矩 ... 34 ± 3 N·m (25 ± 2 lb ft)
(6) 116-3503 弹簧
- 自由长度 ... 18.5 mm (0.73 in)
- 外径 ... 6.5 mm (0.26 in)
Show/hide table
| 图 3 | g01435186 |
剖面 B-B | |
(7) 173-3523 弹簧
- 数量 ... 2
- 自由长度 ... 71.5 mm (2.81 in)
- 外径 ... 34 mm (1.3 in)
- 自由长度 ... 71.5 mm (2.81 in)
(8) 两个先导安全阀总成的扭矩 ... 295 ± 5 N·m (220 ± 4 lb ft)
Caterpillar Information System:
C2.2 Generator Sets Control Panel
C7 and C9 On-highway Engines Fuel System - Prime
TH48-E80 Petroleum Transmission Pressure Control Valve (Transmission)
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C175 Generator Sets High Pressure Fuel Lines
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
C7 On-highway Engine Water Lines
Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371} Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371}
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
2005/08/01 New Bracket for the Fuel Line {1274}
C15 On-Highway Engine Camshaft
C9 Generator Set Safety Messages
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Plate Locations and Film Locations
C9 Generator Set Model View Illustrations
C15 On-Highway Engine Crankshaft
C9 Engine for Caterpillar Built Machines Turbocharger - Remove
C13 On-highway Engine Front Housing and Covers
C9 Engine for Caterpillar Built Machines Turbocharger - Install
C9 Engine for Caterpillar Built Machines Cylinder Head - Remove
C15 On-Highway Engine Electronic Unit Injector
2006/02/06 A New Exhaust Manifold Gasket is Used {1059}