Crankshaft
Show/hide table
图 1 | g01527136 |
(1) 连杆轴承轴颈 (2) 主轴承轴颈 (3) 正时齿轮 |
注: 请参阅技术规格, "连杆轴承轴颈"和技术规格, "主轴承轴颈"以了解有关曲轴轴颈的更多信息。
注: 有关弯曲曲轴测量的正确步骤,请参阅可再利用零件和修补操作指南, SEBF8054, "测量和拉直弯曲曲轴的步骤"。
(A) 定位销从曲轴表面的突出量 ... 4.1 ± 0.5 mm (0.16 ± 0.02 in)
(B) 定位销从曲轴表面的突出量 ... 6.4 mm (0.25 in)
(C) 曲轴的端隙 ... 0.11 至 0.57 mm (0.004 至 0.022 in)
注: 安装齿轮时,正时标记 "V" 必须朝向曲轴的前方。
注: 止推板应只用在主轴承的中间上。
Caterpillar Information System:
C9 Generator Set Model View Illustrations
C9 Generator Set Plate Locations and Film Locations
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Safety Messages
C15 On-Highway Engine Camshaft
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
C2.2 Generator Sets Control Panel
C7 and C9 On-highway Engines Fuel System - Prime
TH48-E80 Petroleum Transmission Pressure Control Valve (Transmission)
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C175 Generator Sets High Pressure Fuel Lines
C9 Engine for Caterpillar Built Machines Turbocharger - Remove
C13 On-highway Engine Front Housing and Covers
C9 Engine for Caterpillar Built Machines Turbocharger - Install
C9 Engine for Caterpillar Built Machines Cylinder Head - Remove
C15 On-Highway Engine Electronic Unit Injector
2006/02/06 A New Exhaust Manifold Gasket is Used {1059}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
C2.2 Generator Sets Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
C9 Engine for Caterpillar Built Machines Cylinder Head - Install
C-10 Petroleum Engine Engine Oil Pump - Remove