Turbocharger - Remove
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 断开软管组件 (2)。
- 拆下螺栓 (5) 和管组件 (4)。
- 将适当起吊设备连在涡轮增压器 (1) 上。 涡轮增压器 (1) 的重量约为
27 kg (60 lb) 。 拆下螺母 (3)。 拆下涡轮增压器 (1) 和密封垫。
Show/hide table
图 1 | g01270689 |
Caterpillar Information System:
C15 On-Highway Engine Crankshaft
C9 Generator Set Model View Illustrations
C9 Generator Set Plate Locations and Film Locations
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Safety Messages
C15 On-Highway Engine Camshaft
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
C2.2 Generator Sets Control Panel
C7 and C9 On-highway Engines Fuel System - Prime
TH48-E80 Petroleum Transmission Pressure Control Valve (Transmission)
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C13 On-highway Engine Front Housing and Covers
C9 Engine for Caterpillar Built Machines Turbocharger - Install
C9 Engine for Caterpillar Built Machines Cylinder Head - Remove
C15 On-Highway Engine Electronic Unit Injector
2006/02/06 A New Exhaust Manifold Gasket is Used {1059}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
C2.2 Generator Sets Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
C9 Engine for Caterpillar Built Machines Cylinder Head - Install
C-10 Petroleum Engine Engine Oil Pump - Remove
C280 Marine and Petroleum Engines Engine Speed/Timing Sensor