Pilot Control Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the pilot control valve.
- Remove bolts (5). Separate valve body (1), bulldozer tilt control valve (4), ripper lift control valve (2), ripper tilt control valve (3) and manifold (6) .
Show/hide table
Illustration 1 | g00558151 |
- Remove three O-ring seals (8) and three O-ring seals (9) from the valve body.
Show/hide table
Illustration 2 | g00558152 |
Note: The bulldozer tilt control valve, the ripper lift control valve and the ripper tilt control valve are disassembled in the same way. Follow steps 2 through 7 in order to disassemble the control valves.
- Remove housing (7) from the valve stem and the valve body.
- Remove O-ring seal (10) and seal (11) from housing (7) .
Show/hide table
Illustration 3 | g00558153 |
- Remove housing (12) from the valve body. Remove the O-ring seal from housing (12) .
Show/hide table
Illustration 4 | g00558154 |
- Remove valve stem (13) from the valve body.
Show/hide table
Illustration 5 | g00558155 |
- Remove retainer (16), spring (15) and retainer (14) from the end of valve stem (13). If necessary, remove plug (17) and the O-ring seal from the end of valve stem (13). Remove plug (17) and the O-ring seal from the valve stems of the ripper tilt control valve and the ripper lift control valve.
Show/hide table
Illustration 6 | g00558156 |
- Remove plug (18) and the O-ring seal from valve body (1) .
Show/hide table
Illustration 7 | g00558157 |
- Remove spring (20) and valve stem (19) from valve body (1) .
Show/hide table
Illustration 8 | g00558158 |
Caterpillar Information System:
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Overspeed Controller Valve - Disassemble
D11R Track-Type Tractor Machine Systems Overspeed Controller Valve - Assemble
D11R Track-Type Tractor Machine Systems Implement Pump - Remove
D11R Track-Type Tractor Machine Systems Implement Pump - Install
D11R Track-Type Tractor Machine Systems Implement Pump - Disassemble
D11R Track-Type Tractor Machine Systems Implement Pump - Assemble
D11R Track-Type Tractor Machine Systems Fuel Tank - Remove
D11R Track-Type Tractor Machine Systems Fuel Tank - Install
D11R Track-Type Tractor Machine Systems Fan Drive Pump (Variable Displacement, Front) - Remove
D11R Track-Type Tractor Machine Systems Fan Drive Pump (Variable Displacement, Front) - Install
D11R Track-Type Tractor Machine Systems Fan Drive Pump (Variable Displacement, Front) - Disassemble
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Install
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Remove
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Assemble
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Disassemble
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Machine Preparation for Troubleshooting
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Remove
D11R Track-Type Tractor Machine Systems Refrigerant Compressor - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Evaporator Core - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Carriage (Beam) - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Assemble