Fuel Filter And Base
Usage:
Remove Fuel Filter And Base
Typical Example
1. Remove fuel filter (1) from base with tool (A).
Typical Example
2. Disconnect wiring harness (3) from the sending unit Disconnect fuel line (2) from the filter base.
3. Remove two bolts, filter base (4) and gasket from the fuel injection pump.
Install Fuel Filter And Base
1. Install gasket and fuel filter base on the fuel injection pump.
2. Connect tube assembly (1) and wiring harness (2) to the fuel filter base.
3. Install fuel filter (4). Follow the instructions on the fuel filter for the correct installation procedure.
Caterpillar Information System:
3306 VEHICULAR ENGINE Oil Filter And Oil Filter Bypass Valves
3306 VEHICULAR ENGINE Fuel Transfer Pump
3306 VEHICULAR ENGINE Fuel Ratio Control
3306 VEHICULAR ENGINE Fuel Injection Pump Housing
3306 VEHICULAR ENGINE Fuel Injection Pumps
3306 VEHICULAR ENGINE Governor
3306 VEHICULAR ENGINE Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE Fuel Injection Nozzles
3306 VEHICULAR ENGINE Fuel Injection Lines
3306 VEHICULAR ENGINE Alternator
3306 VEHICULAR ENGINE Electric Starting Motor
3306 VEHICULAR ENGINE Batteries
3306 VEHICULAR ENGINE Engine Oil Cooler
3306 VEHICULAR ENGINE Exhaust Manifold
3306 VEHICULAR ENGINE Turbocharger
3306 VEHICULAR ENGINE Turbocharger
3306 VEHICULAR ENGINE Aftercooler
3306 VEHICULAR ENGINE Valve Cover
3306 VEHICULAR ENGINE Rocker Shaft And Push Rods
3306 VEHICULAR ENGINE Rocker Shaft
3306 VEHICULAR ENGINE Cylinder Head And Spacer Plate
3306 VEHICULAR ENGINE Valve Lifters
3306 VEHICULAR ENGINE Valves
3306 VEHICULAR ENGINE Valve Guides