Wrong Fuel Setting Information Given In Microfiche{0374,1251,1264,1257}
Usage:
3406 ( 92U39968-Up ) Truck Engines
The wrong static fuel setting is given for 3406 (92U39968-Up) Truck Engines in the "Fuel Setting Information - Current Industrial, Marine, Electric Set, Truck, Agriculture and Gas Engines," Form No. SBFY1107.
The wrong information is given on microfiche 1 of 2, grid location E-7.
The measurements given under "Static Fuel Setting" are in inches not millimeters, so change "(mm)" to "(in)".
Change the static fuel setting for 250 horsepower engines at 1600 rpm from ".150" to ".125."
Caterpillar Information System:
1981/10/19 Use Shorter Lubrication Periods Under Severe Operating Conditions{7500}
1981/10/19 FT1565 Valve Guide Removal And Installation Tool{0623,0624,1104}
1981/10/12 FT1561 Cylinder Liner Storage Cabinet{0632}
1981/10/12 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12 Use Of Engine Supports On Flywheel Housing Can Change Face And Bore Runout Measurements{1157}
1981/10/12 New Cylinder Block Permits Use Of A Small-Frame Turbocharger{1201,1052}
1981/10/05 Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}
1981/10/05 New Piston Ring Group For Parts Service In Natural Gas Applications{1215}
1981/10/05 New Torque Specifications For Flared And O-Ring Fittings{5057,7553}
1981/10/05 Hydraulic Cylinder Repair Stands And Kits Now Available From Caterpillar Parts Department{0623,0626}
1981/10/05 Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/09/28 Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/10/19 New Washers Make A Better Seal In Aftercooler Water Pumps{1363}
1981/10/19 Reference Chart For Major Production Changes On 3208 Engines{0374,0375,1000}
1981/10/26 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting {1101,1201}
1981/10/26 "Athena" Supports HBM's Field Servicemen {0374}
1981/10/26 Fuel Shutoff Solenoid Seals Better {1259,1286}
1981/11/02 Caterpillar Service Tools Are Going Metric {0650}
1981/11/02 More Equipment Available For Reconditioning Track Rollers {4180,0621,0674}
1981/11/02 Steel Retainer Clips For Sure Seal Connectors Used In Electrical Harnesses {0683,1408,7553}
1981/11/02 Correct Power Connection Prevents Damage To Diagnostic Service Tools {0651}
1981/11/09 New 6V3010 Puller Group (Cross Bar Type) Is Easier To Use In Many Applications{0621}
1981/11/09 New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel{1052}
1981/11/09 New Parts And Assembly Procedure Used On Main Shaft{3306}