1981/10/19 Caterpillar

FT1565 Valve Guide Removal And Installation Tool{0623,0624,1104}

Usage:

An FT1565 Valve Guide Removal And Installation Tool can be fabricated for use with the Winona Van Norman PH-7000 Heavy Duty Production Headmaster System and bed extension. Valve guides can now be hydraulically removed and installed with more efficiency than before. This tool is to be used for all Caterpillar engines that have cylinder heads with valve guides for which a replacement can be made.

The FT1565 Valve Guide Removal and Installation Tool is generally installed on the left rear corner of the main table. See the illustration. The C-frame assembly of this tool has three pivot points that give it many positions for use. A single action hydraulic cylinder is fastened to this frame and is controlled by a foot operated air driven hydraulic pump.

The Engine And Component Reconditioning Guide Bulletin R-12, "The FT1565 Valve Guide Removal and Installation Tool", Form SEBF4570 has more information. Drawings to fabricate this tool are available from your Division Service Manager.

FT1565 Valve Guide Removal And Installation Tool

Caterpillar Information System:

1981/10/12 FT1561 Cylinder Liner Storage Cabinet{0632}

1981/10/12 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}

1981/10/12 Use Of Engine Supports On Flywheel Housing Can Change Face And Bore Runout Measurements{1157}

1981/10/12 New Cylinder Block Permits Use Of A Small-Frame Turbocharger{1201,1052}

1981/10/05 Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}

1981/10/05 New Piston Ring Group For Parts Service In Natural Gas Applications{1215}

1981/10/05 New Torque Specifications For Flared And O-Ring Fittings{5057,7553}

1981/10/05 Hydraulic Cylinder Repair Stands And Kits Now Available From Caterpillar Parts Department{0623,0626}

1981/10/05 Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}

1981/09/28 Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}

1981/09/28 Oil Pan Drain Plug Has More Threads{1302}

1981/09/21 Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up{1210,1209}

1981/10/19 Use Shorter Lubrication Periods Under Severe Operating Conditions{7500}

1981/10/19 Wrong Fuel Setting Information Given In Microfiche{0374,1251,1264,1257}

1981/10/19 New Washers Make A Better Seal In Aftercooler Water Pumps{1363}

1981/10/19 Reference Chart For Major Production Changes On 3208 Engines{0374,0375,1000}

1981/10/26 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting {1101,1201}

1981/10/26 "Athena" Supports HBM's Field Servicemen {0374}

1981/10/26 Fuel Shutoff Solenoid Seals Better {1259,1286}

1981/11/02 Caterpillar Service Tools Are Going Metric {0650}

1981/11/02 More Equipment Available For Reconditioning Track Rollers {4180,0621,0674}

1981/11/02 Steel Retainer Clips For Sure Seal Connectors Used In Electrical Harnesses {0683,1408,7553}

1981/11/02 Correct Power Connection Prevents Damage To Diagnostic Service Tools {0651}

1981/11/09 New 6V3010 Puller Group (Cross Bar Type) Is Easier To Use In Many Applications{0621}