Engine Lifting Bracket
This engine is equipped with one engine lifting brackets. The bracket is used to lift the engine and the generator as a unit. The bracket is located near the rear of the engine.
Torque for bolts ... 22 N·m (16 lb ft)
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Engine Oil Pressure Switch
EMCPII+ for Gas Engines Engine Does Not Shutdown (for Engine with EIS)
EMCPII+ for Gas Engines Engine Does Not Shutdown (for Engine with ECM)
EMCPII+ for Gas Engines Schematics and Wiring Diagrams
EMCPII+ for Gas Engines Block Diagram of Generator Set Control
C-10, C-12, C-15 and C-16 Industrial Engines CID 0247 FMI 09 J1939 Data Link communications
EMCPII+ for Gas Engines GSC CID 0446 - FMI 12
C9 Marine Engines and C9 Marine Generator Sets Alternator - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Boost Pressure Sensor - Remove and Install
C4.4 Industrial Engine Piston Ring Groove - Inspect
C3.3 Industrial Engine Water Temperature Regulator - Test
C4.4 Industrial Engine Cooling System - Inspect
EMCPII+ for Gas Engines GSC CID 0100 - FMI 02 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0100 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0110 - FMI 02 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0110 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0248 - FMI 09 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0248 - FMI 09 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0441 - FMI 12 (for Engine with ECM)
2003/04/01 New Flash File Software Is Used for Product Link 151/201 {7620}
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install - Fractured Connecting Rod
EMCPII+ for Gas Engines GSC CID 0441 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0444 - FMI 12 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0444 - FMI 12 (for Engine with EIS)