Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
Usage:
3408;
3412 Industrial And Marine Engines
Description of Change: A single connector is now used instead of the elbows in the fuel filter lines group for 3408 and 3412 Industrial and Marine Engines. Use of the connector decreases possible leakage at the connections.
Adaptable As: The new connector is a direct replacement for the former parts as shown in the chart.
Location of the connector.
Caterpillar Information System:
1981/07/06 New Retainers Used To Hold Oil Pump Output Tube In Manifold{3314}
1981/07/06 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters{1000,1230,1219,1203}
1981/07/06 Mailing Of Engine News And Truck Engine News Microfiche Libraries{0374}
1981/07/06 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders{0623}
1981/06/29 Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/06/29 Tube Added To Prevent Air Leakage In Pressure Regulator{3012,3165,3166,3186}
1981/06/29 New Gasket Used For End Cover On Inlet Manifold{1058}
1981/06/29 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing{0610,1052}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29 Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
1981/07/06 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge{7457,7451,3310,3314}
1981/07/06 Use 6V4068 Tool Group To Machine Camshaft Thrust Face{0663,1253}
1981/07/06 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier{0621}
1981/07/06 Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/13 Add New Information To Two Current Guidelines For Reusable Parts{0374}
1981/07/13 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts{0621}
1981/07/13 Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13 Coolant Conditioner Elements And Their Capacities{1350}
1981/07/13 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13 Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/08/03 Indications Of High Oil Temperatures In BrakeSaver Circuit Can Be Caused By Wrong Gauge Connection{1155,1159,7450}
1981/08/03 Delay Expected In Replacement Of Canceled Service Tools{0651}